2 April 2025 in IEEE Transactions on Power Electronics
This article presents a robust design of a megawatt-scale medium-voltage (MV) direct current transformer (DCT) that features a bidirectional LLC resonant converter topology. This topology harnesses the inherent ability to control power flow seamlessly between two MVdc buses without relying on closed-loop control, maximizing efficiency and stability. Integrated gate-commutated thyristors were chosen as the power devices due to their superb on-state properties, enhancing the performance of this resonant DCT. The power stages incorporate a three-level neutral point clamped topology, paired with a split-capacitor dc-link, enabling three-level modulation during soft-start and two-level modulation during normal operation. Taking advantage of the resonant operation, the record-high switching frequency in the range of 5 kHz is achieved. The custom-designed medium-frequency transformer uses oil-insulated copper pipes for the windings and nanocrystalline core while integrating the inductive elements of the resonant tank. Power-in-the-loop experiments are presented that demonstrate the system's efficiency approaching 99%.
13 October 2022 in IEEE Access
Owing to increasing power demand, new technologies, such as solid-state transformers, are progressively researched and improved. Thereby, galvanic isolation and voltage adaptation are achieved by medium frequency transformers. To reach high power density designs, transformer windings can be realized by means of copper pipes, allowing for efficient liquid cooling. This paper provides insight to many relevant aspects for the use of hollow copper conductors as windings. This includes electrical and thermal modeling, as well as considerations regarding mechanical implementations. Additionally, the winding concept is investigated based on a 1 MW medium frequency transformer prototype.
31 May 2019 in IEEE Transactions on Transportation Electrification
For safety and longevity reasons, in subzero temperatures, lithium-ion batteries can only be charged after precommissioning their temperature. Therefore, in such conditions fast charging depends on fast heating. Recently, the injection of AC currents into lithium-ion batteries has been reported as a technique with potential to decrease heating time. This paper proposes a method based on a multi-objective algorithm for DC-DC converter design using transformerless resonant filters. The method enables the DC-DC converters to produce magnified AC current in addition to the DC current. Using the proposed design method, a topological survey of DC-DC converters with magnified AC current capability composed of either half-or full-bridge switch arrangements is carried out. In the presented experimental setup, it is demonstrated that by using an LCL circuit with specific component values and a full-bridge switch arrangement, magnifications of up to 15.7 may be reached. Further, by matching the switching frequency with the frequency where the LCL and the battery resonate, for the same injected AC current, the current flowing in the semiconductors and the switching frequency could be reduced. This allowed a loss reduction in the semiconductors of up to 75%, when compared with an equivalent DC-DC converter enabled to produce a nonmagnified AC current.
21 January 2021 in IEEE Transactions on Power Electronics
This article introduces a thermally-compensated magnetic hysteresis model, capable of accurately determining core losses of ferrite materials while accounting for core temperature variations. The employed model is based on permeance-capacitance analogy and it captures the frequency-independent hysteresis effect with the help of the Preisach model. For validation purposes, a 100 kW, 10 kHz realized medium frequency transformer prototype is selected and modeled as a part of a full-bridge LLC resonant converter in a time-domain simulation environment. Conducted simulations show the ability of the thermally-compensated magnetic hysteresis model to impact the generated core losses for core temperatures of up to 120 o C. Finally, a temperature-feedback loop within the transformer is successfully closed inside of a system-level simulation, allowing for a more precise determination of the core and winding steady-state temperatures.