30 June 2025 in Journal of Scientific Research and Reports
NCNarvendra Singh Chauhan
Engineering properties of crop plants play a vital role in the design and optimization of efficient harvesting machinery. Full-scale adoption of mechanized harvesting technologies remains limited in the NEH region due to fragmented fields, undulating terrain, and the absence of crop-specific data for machinery design. Under such conditions, the effective design of harvesting equipment requires precise information on crop characteristics. This study investigates the morphological and physical characteristics of the PR-126 paddy variety (Oryza sativa L.) cultivated in the North Eastern Hill (NEH) region of India, aimed at providing essential data for harvester design. Fifty paddy samples were randomly collected from the field and analyzed for plant height, panicle height, stem diameter, crop spacing, density, and moisture content using standard instruments such as a digital Vernier Caliper, measuring tape, and an infrared moisture analyzer. The average plant height and panicle height were found to be 904 ± 74 mm and 506 ± 74 mm, respectively, with a mean stem diameter of 7.62 ± 0.81 mm. The crop exhibited a row spacing of 200 ± 10 mm and a plant density of 24 hills m-2. Moisture content measured post-harvest was 21.74 ± 0.74% (wet basis) for grain and 40.46 ± 3.81% (wet basis) for straw. The maximum number of observations falls between 36% to 44%. Overall, the results indicate that while the majority of the straw samples had moisture levels suitable for harvesting, safe storage, some may require additional drying to prevent spoilage or microbial growth. Most parameters followed normal or near-normal distributions, indicating uniform growth conditions. These characteristics provide critical input for determining appropriate cutting height, blade specifications, and conveying mechanisms for harvesting equipment adapted to hilly terrains.
5 February 2026 in WORK: A Journal of Prevention, Assessment & Rehabilitation
Background: Lawnmower operators are exposed to high noise and hand-arm vibration (HAV) during their work, which originates mainly from the engine and rotating parts. Higher exposure causes intangible issues for the well-being of the operators, results in immediate and long-term effects on the health, comfort, and safety of the operators. Objective: The study involved measuring noise and HAV from a powered cylindrical lawnmower, developing retrofittable interventions, and evaluating noise and HAV levels with the interventions, and compared their effectiveness using a health risk assessment. Methods: The study was done at three speeds and two modes of operation. The measured noise and HAV amplitudes exceeded the permissible limits of international standards. Higher amplitudes were observed at resonant frequencies of the ear and hand. To mitigate the exposure and increase the safe working hours of the operators, two interventions were developed and retrofitted to the existing lawnmower. The noise and HAV were measured with interventions and compared against pre-intervention phase. Operator's physiological, psychophysical, and postural parameters were also assessed in the lawnmower operation. Results: The developed interventions reduced the noise level from approximately 95 dB(A) to 85 dB(A), satisfying it within internationally permissible limits. HAV has been reduced from 23 ms –2 to below 10 ms –2 , thereby increasing the safe exposure time by approximately 2.3 times with interventions. However, the operator's physiological, psychophysical, and postural parameters remained unchanged as operational requirements remained the same. Conclusion: Noise and HAV reduction through interventions provided a safer working environment for the lawnmower operators.