1 November 2018 in Ocean Engineering
1 May 2018 in Marine Structures
1 August 2020 in Géotechnique
NSNallathamby Sivasithamparam
Nallathamby Sivasithamparam
In order to perform optimised and safe design of foundations for offshore wind turbines (OWT), it is important to have calculation tools that describe the key features of water-saturated soil subjected to complex and irregular loading over a wide range of strain levels. Soils subjected to cyclic loading are prone to strain accumulation. The accumulated (plastic) volumetric strain may result in excess pore pressure or stress relaxation, which will reduce the effective stresses, stiffness and strength of the material. Strain accumulation in dense sand is a complex mechanism of deformation and it is challenging to describe it properly. Four different soil models to describe the stress–strain relationships of dense sand are evaluated in this paper: two implicit models that follow the actual stress history and two explicit models that calculate the accumulated strains as a function of number of cycles. These models are first evaluated on the basis of their theoretical framework and back-calculations of laboratory tests specifically carried out for the design of OWT foundations in dense sand. Second, the models are implemented in finite-element analyses and evaluated on the basis of the analyses of an OWT monopile subjected to different loading conditions.
4 July 2017 in Wind Energy Science
KSKristoffer Skjolden Skau
Several studies have emphasized the importance of modelling foundation response with representative damping and stiffness characteristics in integrated analyses of offshore wind turbines (OWTs). For the monopile foundation, the industry standard for pile analysis has shown to be inaccurate, and alternative models that simulate foundation behaviour more accurately are needed. As fatigue damage is a critical factor in the design phase, this study investigates how four different soil-foundation models affect the fatigue damage of an OWT with a monopile foundation. This study shows how both stiffness and damping properties have a noticeable effect on the fatigue damage, in particular for idling cases. At mud-line, accumulated fatigue damage varied up to 22 % depending on the foundation model used.
1 September 2016 in Energy Procedia
Designing support structures for offshore wind turbines is a complex task as these are highly dynamic systems subjected to long-term cyclic loads with variable amplitude. Long-term cyclic loading may cause stiffening or softening of the soil around the pile foundation of an offshore wind turbine, which leads to variations in the foundation stiffness and accumulated permanent rotation of the pile. Although variations in the foundation stiffness can negatively impact the fatigue life, the long-term variability of the soil conditions is normally not considered in the fatigue damage assessment. The main objective of this study is the investigation of the impact of changes in soil parameters on the fatigue lifetime for an offshore wind turbine founded in loose sand. For this purpose, a generic monopile based offshore wind turbine with flexible foundation model was used. The soil-pile interaction was modeled with a distributed spring model using nonlinear API p-y curves. Integrated analyses in the time domain were performed and fatigue damage was assessed in terms of a damage equivalent bending moment at mudline. The fatigue lifetime varies between -9 percent and +4 percent when considering changes in soil conditions, depending on the assumption of soil softening or stiffening, respectively. These results indicate that changes in soil parameters should be taken into account in the fatigue damage calculations of offshore wind turbines for more precise fatigue lifetime estimation. Moreover, it is emphasized that more accurate modeling of soil-pile interaction is required in the design and optimization of offshore wind turbines
1 March 2019 in Marine Structures