27 March 2018 in IEEE Transactions on Industry Applications
The next big change in various industry applications is associated with power dense motors, such as permanent magnet synchronous motors (PMSMs). Utilization of multiphase PMSM can offer an additional fault-tolerant capability to their applications. Combining both advantages, this paper proposes a simple yet robust current control strategy for a five-phase PMSM under normal operation and in a case of a loss of one phase. Traditional linear current controllers successfully applied to reference tracking of a healthy motor may become less efficient during postfault operation due to additional unmodeled dynamics. This paper proposes a modified angular transformation to a special rotating frame in which the postfault permanent magnet flux linkage remains unchanged and the motor model remains decoupled. Following this, a nonlinear current control scheme based on sliding mode control is proposed, which successfully treats model inaccuracies and provides good dynamic performance and tracking accuracy. Feasibility of the proposed control strategy is experimentally validated on a laboratory scale PMSM motor with a digital signal processor/field programmable gate array based drive.
29 March 2018 in IEEE Transactions on Industry Applications
Large induction motors used in variable speed industrial applications (digging, traction, etc.) undergo dynamic stresses at high power levels. Their lifetime is reduced as compared with constant speed motors and downtime costs are very high. To monitor the condition of such motors, advanced sensor instrumentation is considered, including installation of Hall effect flux sensors inside the motor airgap. Such an advanced instrumentation enables continuous measurement of the airgap flux in both time and space domains simultaneously. This allows for advanced fault detection algorithms. This paper presents a method for early diagnosis of stator turn-to-turn faults and static eccentricity, and differentiation between these two conditions. The paper demonstrates that the proposed method detects, localizes, and quantifies both faults with high accuracy and sensitivity. Furthermore, each fault can be detected at an incipient stage and its development can be predicted. The results of the presented study have been supported by both simulation and experimental results obtained on a laboratory scale induction motor. Based on the results presented in the paper, a real-time condition monitoring system has been developed.
15 November 2016 in IEEE Transactions on Industry Applications
MJMohsen Ghaffarpour Jahromi
Mohsen Ghaffarpour Jahromi
Condition monitoring of induction motors is important for their efficient and reliable operation. Most of the existing electrical techniques of condition monitoring and fault diagnosis are based on current, voltage, vibration, or/and flux measurements external to the motor. This paper proposes an online fault diagnostic system, which is based on measurements of internal main air gap flux density of an induction motor by an array of Hall effect flux sensors. Such an instrumentation is justified for large specialized induction motors with particularly high-reliability requirements. Fundamental theory behind the air gap flux density as a function of time and space, and its distortions introduced by various faults, is reviewed in this paper. Based on this theory, this paper proposes a comprehensive condition monitoring approach to diagnose induction motor faults including stator turn-to-turn shorts, rotor bar damage, and static and dynamic eccentricity, which may be present individually or at the same time. Moreover, the proposed approach not only detects each fault at its early stage but also determines its exact location and severity. The principles proposed in this paper are illustrated by extensive simulations and are experimentally validated on a prototype online condition monitoring system based on National Instruments real-time platform.
8 June 2016 in IEEE Transactions on Industrial Electronics
Model predictive control (MPC) has been widely advocated as a design strategy for many aspects of industrial electronics. The methodology has been strongly promoted by some researchers but has also attracted criticism from others. In this context, the purpose of this paper is twofold. First, we show that many existing and popular control strategies, including finite set MPC and linear controllers [proportional integral, proportional resonant (PR)], can be viewed as special cases of MPC. Second, we show that the predictive control framework allows one to embellish these classical control architectures with novel features and to design new and advanced control architectures to address various challenges posed by power electronics applications. The findings of the paper are supported by a practical example of designing of a novel form of PR controller with superior tracking performance and delay compensation, confirmed via simulation and experiments.
3 April 2014 in Journal of Control and Decision
The past three decades have witnessed important developments in the theory and practice of model predictive control (MPC). In particular, considerable effort has been devoted to robust MPC theory. There have also been many successful applications. This paper will give a brief overview of existing results and summarise experience gained in two real-world applications. We also present some reflections on issues which, in the authors’ opinion, deserve further attention.
13 February 2018 in IEEE Transactions on Industry Applications
Most of the existing electrical techniques of condition monitoring and fault diagnosis are based on frequency analysis of signals measured externally to the motor. In this paper, it is proposed to add the space dimension to the measured signals by using an array of Hall effect flux sensors installed inside the motor air gap, and to explore the advantages brought by such an instrumentation. The paper presents analytical models of air gap flux density expressed in terms of time and space, for a healthy motor and for a motor with rotor bar faults and mixed eccentricity. Based on these models, the paper proposes a new technique for early detection of rotor bar faults and mixed eccentricity, and for discrimination between them. The paper demonstrates that, with the help of the proposed technique, the severity of each fault and its location relative to rotor or stator can be accurately established. The results of the presented study are supported by simulations and validated by experiments on a laboratory scale induction motor. The formulated fault diagnosis algorithm is suitable for real-time implementation.