23 February 2021 in IEEE Transactions on Electron Devices
The combination of the InAs/GaSb heterojunction and the line-tunneling mechanism is considered as one of the most promising approaches to simultaneously obtain high ON-state current ( ${I}_{ \mathrm{\scriptscriptstyle ON}}$ ) and low subthreshold swing (SS) in tunneling field effect transistors (TFETs). However, in an InAs/GaSb line-tunneling field effect transistor (LTFET), the isolation between the source and the drain is a big issue. The leakage current path could lead to complete loss of the OFF-state characteristics in extreme cases. The “cantilever” or “airbridge” structure is usually introduced to cutoff the leakage path. However, it also induces serious reliability problems and brings additional process complexity. In this article, an N+ doped buried drain is first proposed to form a reverse biased p-n junction with the $\text{P}\boldsymbol +$ source and effectively cuts the leakage current path off. The InAs $\boldsymbol /$ GaSb LTFETs with this buried drain technique exhibits ${I}_{ \mathrm{\scriptscriptstyle ON}} \boldsymbol / {I}_{ \mathrm{\scriptscriptstyle OFF}} > {10}^{{7}}$ and SS < 60 mV $\boldsymbol /$ dec for five decades of current. Besides the excellent performance, the buried drain technique keeps the device planar and brings no additional fabrication complexity, which is of great significance for future experimental investigation and the low power applications.
7 December 2017 in IEEE Transactions on Electron Devices
Based on an analytical surface potential and a simple mathematical approximation for the source depletion width, a physics-based capacitance model with closed form for silicon double-gate tunnel field-effect transistors (TFETs) is developed. Good agreements between the proposed model and the numerical simulations have been achieved, which reveal that the tunneling carriers from source have negligible contribution to the channel charges and the gate capacitance can be almost acted as the gate-drain capacitance, which is quite different from that of MOSFETs. This model without involving any iterative process is more SPICE friendly for circuit simulations compared with the table-lookup approach and would be helpful for developing the transient performance of TFET-based circuits.
9 November 2021 in IEEE Transactions on Electron Devices
The nanowire gate-all-around structure with the ultimate channel electrostatic integrity exhibits the best immunity to short channel effects and improved scaling capability compared with other multigate structures. In this article, both the tunneling current and capacitance models are developed simultaneously for nanowire tunneling field-effect transistors (FETs). Based on the same surface potential model, the developed current model and capacitance model share the common parameters and therefore can be easily integrated as a complete model for circuit-level simulations. Moreover, there is no iterative process involved during the model derivation indicating the models would be efficient for circuit simulations. The proposed models are also implemented into a circuit simulator with SPICE net-list to simulate the inverter, NAND, and NOR gates. Correct circuit behaviors obtained validate the model compatibility with the SPICE platform and usefulness for the further investigation of nanowire-based tunnel FET (TFET) circuits.
26 September 2018 in IEEE Transactions on Electron Devices
In this paper, a universal analytical current model for a double-gate Si-based tunnel field-effect transistor (TFET) is presented considering the effects of charges in source depletion region and channel. An accurate surface potential model is developed first by solving the pseudo-2-D Poisson equations in the depletion regions, and then is used to calculate the drain tunneling current. The modeling results match well with that obtained from the Technology computer-aided design simulations under various biasing conditions, which indicate that the analytical current model would be very helpful for the further TFET-based circuits design. Furthermore, the influence of the source depletion is also studied, and the presented model with considering the source depletion region and the channel inversion charges is proved to be much more accurate than that ignoring the source depletion.
18 January 2021 in IEEE Transactions on Electron Devices
In this article, a novel planar InAs/GaSb heterojunction face-tunneling FET (HFTFET) is proposed for device performance improvement. As is known in previous studies, the entire tunneling junction of HFTFET can be controlled by gate effectively and uniformly, and therefore, the large effective tunneling area and extremely steep turn on/off switch would be achieved. However, the leakage current between source and drain degrades the OFF-state characteristics and turn on/off switch greatly. Hence, an implanted drain is introduced in the proposed InAs/GaSb HFTFET for reducing the leakage to optimize the performance, which also makes the fabrication process compatible with the standard CMOS process platform. Consequently, large tunneling current, steep subthreshold swing, and small leakage current can be obtained simultaneously, which would further promote the development of tunnel field-effect transistors (TFETs) and their ultralow-power applications.