3 April 2020 in Applied Optics
As the research work in surface plasmon resonance (SPR)-based photonic crystal fiber (PCF) is getting tighter, a perfectly circular-shaped PCF with elliptical air holes is proposed where the performance parameters are improved significantly. The performances among our designed elliptical, circular, and rectangular air holes are compared, and the best result is achieved with the elliptical air holes. The technique used for the investigation is the finite element method, and for the simulation of data COMSOL Multiphysics 5.3a software is used. The method covers a wider range of the optical spectrum from 0.59 to 1.05 µm. The highest confinement loss achieved through our design is 340 dB/cm. The wavelength sensitivity and amplitude sensitivity are 13,000 nm/RIU and , respectively. The sensor resolution is for our proposed design. The proposed sensor also achieved a maximum birefringence of , which is, to our knowledge, the highest birefringence reported so far for a PCF-SPR sensor. This enables the fiber to be operated in a dual-polarized mode. The RI for the analyte ranges from 1.33 to 1.40. Based on all the characteristics, the proposed PCF structure can be used effectively for chemical and biomolecular sensing.
7 February 2022 in IEEE Sensors Journal
Through this paper, a sensor based on localized surface plasmon resonance (LSPR) with simultaneous use of gold and aluminium doped zinc oxide (AZO) as plasmonic materials has been proffered. Incorporating these two different plasmonic materials has brought out a unique dispersion relation where double resonance peaks have been detected. After optimizing structural parameters, the simulated results have distinguished that this sensor exhibits maximum amplitude sensitivity of 8485.2 RIU-1 along with maximum wavelength sensitivity of 46300 nm/RIU in the direction of y-polarization whenever AZO is used as the middle plasmonic material. Furthermore, the sensor obtains a maximum amplitude resolution of 1.18×10-6 RIU and a maximum wavelength resolution of 2.16×10-6 RIU. A higher figure of merit of 2923.2 can also be obtained, indicating higher detection accuracy through this sensor and maximum linearity of R2 = 0.99312. Moreover, the proffered sensor has shown its ability to detect unspecified analytes with a refracting index in the maximum wide range of 1.27 to 1.45. Apart from these sensing parameters obtained from analyzing the double peaks separately, a new sensing parameter called double peak shift sensitivity has been introduced in this study. This sensor displays a maximum double peak sensitivity of 4400 nm/RIU for x-polarization mode and 16500 nm/RIU for y-polarization mode considering the double peaks together for two adjacent RIs. Due to these diverse features, the proposed design can open the doors to notable developments in a wide range of analytes and biological organic chemicals detection with ultra-high accuracy and broadband applications.
14 March 2022 in IET Optoelectronics
A hexagonal outlined porous cladding with vacant core photonic crystal fibre (HOPC‐VC‐PCF) sensor using Zeonex has been presented, which can detect cyanides at the THz regime. Cyanides are incredibly lethal chemicals to humans as they can rapidly cause impairment or even death; such harmful substances must be identified precisely. The proposed model has been analysed at a broad spectrum of THz regimes for three different analytes, and the numerical investigation is performed using the Finite element method (FEM). Simulation results exhibit that at optimum design parameters, extremely high sensitivity of 99.75%, negligible confinement loss of 0.5 × 10 −13 cm −1 , extremely low and flat dispersion of 0.12 ps THz/cm, and other excellent features were obtained. The performance analysis and the design methodology have been depicted in detail. Due to the simplistic design, fabrication of the model is easily achievable by current technology. The remarkable sensing capabilities will not only make it suited in chemicals analysis but also will play vital roles in other applications as well.
30 May 2025 in Journal of the Optical Society of America B
This article explicates the performance of a surface plasmon resonance (SPR) built upon photonic crystal fiber, employing several graphene layers as the singular plasmonic material. The integration of several graphene layers, rather than a monolayer, results in unique triple SPR peaks at three separate resonant frequencies. Simulation results exhibit that this sensor possesses a peak wavelength sensitivity of 4000 nm/RIU in addition to a peak amplitude sensitivity of −1651.38RIU−1 in the y-polarization after optimizing structural parameters. A maximal figure of merit of 200RIU−1 can be reached while preserving the unique triple surface resonance, with the highest linearity R2 reaches 0.9969, confirming the sensor’s capacity to detect unknown analytes in all three resonant trendlines. The suggested design features a sensor length of up to 14.93 µm, which corresponds to the third resonant mode, and a detection range from 1.54 to 1.64. In addition, a parameter termed Euclidean sensitivity (ES) has been introduced, which takes into consideration both the resonant wavelength and the confinement loss peak difference. The highest achievable ES is calculated to be 2.448 G.U. The suggested sensor, with high sensitivity and a wide detection range at an exceptionally high RI, can open up an innovative viewpoint for a wide variety of chemical and biological analyte detection and broadband applications.