Jumping is an important locomotion function to extend navigation range, overcome obstacles, and adapt to unstructured environments. In that sense, continuous jumping and direction adjustability can be essential properties for terrestrial robots with multimodal locomotion. However, only few soft jumping robots can achieve rapid continuous jumping and controlled turning locomotion for obstacle crossing. Here, we present an electrohydrostatically driven tethered legless soft jumping robot capable of rapid, continuous, and steered jumping based on a soft electrohydrostatic bending actuator. This 1.1 g and 6.5 cm tethered soft jumping robot is able to achieve a jumping height of 7.68 body heights and a continuous forward jumping speed of 6.01 body lengths per second. Combining two actuator units, it can achieve rapid turning with a speed of 138.4° per second. The robots are also demonstrated to be capable of skipping across a multitude of obstacles. This work provides a foundation for the application of electrohydrostatic actuation in soft robots for agile and fast multimodal locomotion.
26 April 2024 in IEEE/ASME Transactions on Mechatronics
Pipeline is widely deployed in infrastructures, which raises a great demand of pipe-climbing robots to provide pipe-inside inspecting and platform delivery. Soft pipe-climbing robots (SPRs) are intrinsically flexible and able to operate within complex, narrow and curving pipelines more effectively than their rigid counterparts. In the state of the art, the existing SPRs have demonstrated their performances in fixed-diameter pipes that are placed in static-fluid environments, which however does not show their full potential. In this article, we propose a modular design methodology for SPRs that are expected to operate inside complex pipelines. The robot's torso is composed of three PSAs in parallel, which can realize axial elongation as well as omnidirectional bending with pressurized air. The PSA-based tentacles will elongate after inflation to contact and hold the pipe wall using their silicone pads. Furthermore, the slim tentacles and compact torso results in quite small cross-sectional occupation ratio and subsequently low windward resistance from the liquid in the pipeline, which ensures the robot's high passivity in fluid. The proposed robot can adapt to and work in diverse pipelines with complex fluid conditions, such as horizontal and vertical straight, as well as curved pipes with varying diameters, with and without loads, in still and dynamic water flows. In addition, the robot, whose weight is 50 g, can achieve a fast speed of climbing (up to 15.0 mm/s in open air) and high load-carrying ability (up to 1500 g) due to the quick response of the tentacles and large elongation ratio of its body. The experimental results have proved the high maneuverability of the developed SPR.
Multidirectional jumping is commonly found in living creatures and desirable to be integrated into mobile robots for enhanced agility. Existing jumping robots mostly employ complex or cumbersome structures and modular designs to achieve multidirectional jumping. There is a lack of a simple, lightweight, and compact actuator design for multidirectional jumping robots. Here, we present a multidirectional jumping soft robot (MDJSR) driven by a biaxial electrohydraulic actuator (BEHA). The BEHA has a simple structure, i.e., a thin plastic frame-guided film pouch with four pairs of distributed electrodes and enclosed with a dielectric liquid. Inspired by gall midge larvae, the MDJSR exhibits two switchable locomotion strategies, including continuous non-energy-storing jumping to move fast and energy-storing jumping to cross obstacles. Its multidirectional jumping capability was demonstrated in the navigation through a labyrinth with two ways of obstaclecrossing and obstacle-circumventing in different terrain environments. In addition, the robot can be deployed to detect unknown space and collect environmental factors. This work provides an enabling solution to miniature and lightweight multimodal jumping soft robots for various robotic tasks
13 November 2024 in IEEE Robotics and Automation Letters
The human hand is capable of executing a wide range of complex movements due to its biomechanical structure and skin sensing system. Designing an anthropomorphic hand that mimics the biomechanical structure of the human hand and incorporates skin sensing, presents a long-term challenge in the field of robotics. In this paper, we proposed a concept for structure design, which is to combine rigid, flexible and soft components, and designed a rigid-flexible-soft coupled dexterous hand based on this concept. For enhancing dexterous hand's adaptivity to environment, we also developed a soft piezoresistive tactile module inspired by human skin, and mounted it on fingertips to detect sliding states. Meanwhile, we have also designed an integrated system for dexterous manipulation including sensing, actuation and control, based on the concept of embodied intelligence, aiming to achieve a closed-loop control to dexterous hand. This work provides a reliable structure and control strategy to enrich the perceptual abilities of the dexterous hand and enable their applications in unstructured environments.
25 February 2021 in Cognitive Computation and Systems
Soft grippers are compliant and self‐adaptive, and can be highly compatible with the surrounding environment in grasping tasks. Currently, most soft pneumatic grippers are developed with a single grasping configuration, which leads to poor universality for different objects. Additionally, the oscillation caused by actuator's elastic bodies will result in poor stability during grasping and transportation, which can be improved by stiffness enhancement. A four‐fingered soft pneumatic gripper is proposed by integrating multi‐configuration and variable‐stiffness functionality. The multi‐configuration was realised by using the motion characteristics of a tangent mechanism. Meanwhile, a damping method based on electrorheological fluids was applied on a pneumatic actuator to improve the grasping stability. Besides, a machine vision technique was adopted to automatically adjust the grasping posture during manipulation. As a result, the proposed multi‐configuration gripper can self‐adaptively grasp different shapes of objects, especially two classical types, a pen canister as the flat cylinder and a cuboid box as the long cylinder. In addition, the electrorheological variable‐stiffness method was manifested to be applicable for reducing pneumatic finger vibration. This research is expected to improve the versatility and grasping stability of soft pneumatic grippers.