Jumping is an important locomotion function to extend navigation range, overcome obstacles, and adapt to unstructured environments. In that sense, continuous jumping and direction adjustability can be essential properties for terrestrial robots with multimodal locomotion. However, only few soft jumping robots can achieve rapid continuous jumping and controlled turning locomotion for obstacle crossing. Here, we present an electrohydrostatically driven tethered legless soft jumping robot capable of rapid, continuous, and steered jumping based on a soft electrohydrostatic bending actuator. This 1.1 g and 6.5 cm tethered soft jumping robot is able to achieve a jumping height of 7.68 body heights and a continuous forward jumping speed of 6.01 body lengths per second. Combining two actuator units, it can achieve rapid turning with a speed of 138.4° per second. The robots are also demonstrated to be capable of skipping across a multitude of obstacles. This work provides a foundation for the application of electrohydrostatic actuation in soft robots for agile and fast multimodal locomotion.
Soft robotic grippers (SRGs) have been extensively employed in robotic grasping and manipulation applications due to the fact that they are beneficial for pick-and-place of difficult-to-handle and delicate objects with various geometries and stiffness in a comfortable and safer way. This article presents a bio-inspired and shape-adaptive SRG augmented with electroadhesion (EA) functionality, FinEA, by a cost-effective combination of a Fin Ray structured two-fingered SRG with two soft-stretchable EA pads. The EA pads were manufactured by screen printing a layer of electrically conductive and elastomeric carbon black powder mixed with polydimethylsiloxane onto a dielectric substrate. The compliant Fin Ray fingers, composed of soft longitudinal beams and rigid cross beams, were structurally optimized by the finite element method using ABAQUS/CAE based on three key parameters: the open angle of the longitudinal beams, the spacing between the cross beams, and the incline angle of the cross beams. The soft beams were produced by a traditional soft lithography method, whereas the rigid cross beams were three-dimensionally printed. The resultant FinEA grippers were capable of lifting not only flat/thin materials without distorting them due to the employment of EA, but also concave and convex objects due to the passively shape-adaptive Fin Ray structure and the EA functionality. In addition, the proposed FinEA grippers were able to grasp delicate materials and objects whose diameters are larger than the overall gripper length. Furthermore, 65% more weight in shear were picked up by the FinEA gripper when 4 kV was applied compared with 0 V. The FinEA concept provides useful and alternative solution for controllable adhesion-based SRGs and may facilitate the inspiration and development of future SRGs with added functionality and enhanced versatility.
Previous studies have revealed the influence of various lattice structures on the material density and mechanical properties. However, the majority of the topologies that are considered as study objects directly refer to metal/non-crystal lattice cell configurations. Therefore, this paper proposes a configuration generation approach for generating a lattice structure, which can obtain a lattice configuration that enjoys the advantages of both ultra-low weight and favorable mechanical properties. Based on this approach, a new type of face-centered cubic lattice (all face-centered cubic, AFCC) structure with comprehensively optimal properties in terms of mass and mechanical properties is obtained. The experimental samples are formed with Ti6Al4V by the selective laser melting (SLM) method. Quasi-static uniaxial compression performance experiments and finite element analysis (FEA) are conducted on an AFCC structure and the control group body-centered cubic (BCC) structure. The results demonstrates that our optimized AFCC lattice structure is superior to the BCC structure, with elastic modulus and yield limit increases of 143% and 120%, respectively. For the same degree of deformation, the energy absorbed increases approximately 2.4 times. The AFCC demonstrates significant advantages in terms of its mechanical properties and anti-explosion impact resistance while maintaining favorable ultra-low weight, which validates the hypothesis that the proposed configuration generation approach can provide guidance for the design and further research on ultra-light lattice structures in related fields.
Soft adhesion is capable of attaching and bonding to rough surfaces and gripping nonplanar materials. It is preferable for material handling applications where safe interactions with external environments and enhanced adaptability to changing conditions are required. Soft electroadhesion (EA) is an emerging controllable adhesion technology that is especially suited to soft adhesion applications, but is prone to contact peeling that causes unwanted de-adhesion and cannot lift heavy objects unless the lifting force is applied parallel to the surface. Variable stiffness electroadhesion (VSEA) can be used to overcome these issues. Here a VSEA solution is developed by integrating electrostatic layer jamming and soft EA into a monolithic electrically controllable structure. The VSEA pad can achieve rapid response (within 1 s) and significant stiffness change (2200%), resist over four times the peeling force under a weight of 70 g, and generate 24.2%, 34.8%, and 49.3% greater adhesive forces on flat, convex, and concave surfaces, respectively. The promising gripping performance of the VSEA gripper was demonstrated by lifting and moving curved and flat objects. The VSEA concept and solution shown in this work may pave the way for the ready integration of EA into soft robotic systems and promote the broad application of EA technologies.
Soft wall-climbing robots have been limited in their ability to perform complex locomotion in diverse environments due to their structure and weight. Thus far, soft wall-climbing robots with integrated functions that can locomote in complex 3-D environments are yet to be developed. This article addresses this challenge by presenting a lightweight (2.57 g) soft wall-climbing robot with integrated linear, turning, and transitioning motion capabilities. The soft robot employs three pneumatic bending actuators and two adaptive electroadhesion pads, which enable it to flip forward, transition between two walls, turn in two directions, and adhere to various surfaces. Different motion and control strategies are proposed based on a theoretical model. The experimental results demonstrate that the robot can move at an average speed of 3.85 mm/s (0.08 body length/s) on horizontal, vertical, and inverted walls and make transitions between walls with different pinch angles within 180°. Additionally, the soft robot can carry a miniature camera on vertical walls to perform detection and surveillance tasks. This article provides a reliable structure and control strategy to enhance the multifunctionality of soft wall-climbing robots and enable their applications in unstructured environments.