5 May 2011 in IEEE Photonics Journal
The fabrication studies of silica/polystyrene (PS) colloidal microlens arrays with various aspect ratios were performed on the III-nitride light-emitting diodes (LEDs). The use of colloidal-based microlens arrays led to significant enhancement in light extraction efficiency for III-nitride LEDs. In varying the aspect ratios of the microlens arrays, the engineering of various PS thicknesses was employed by using high-temperature treatment and redeposition process. The effects of PS thickness on the light extraction efficiency and far-field emission patterns of InGaN quantum-well (QW) LEDs were studied. The total output powers of microlens LEDs with various PS thicknesses exhibited 1.93-2.70 times enhancement over that of planar LEDs, and the use of optimized PS layer thickness is important in leading the enhancement of the light extraction efficiency in large angular direction.
12 October 1999 in Proceedings of the National Academy of Sciences
An important industrial problem that provides fascinating puzzles in pattern formation is the tendency for granular mixtures to de-mix or segregate. Small differences in either size or density lead to flow-induced segregation. Similar to fluids, noncohesive granular materials can display chaotic advection; when this happens chaos and segregation compete with each other, giving rise to a wealth of experimental outcomes. Segregated structures, obtained experimentally, display organization in the presence of disorder and are captured by a continuum flow model incorporating collisional diffusion and density-driven segregation. Under certain conditions, structures never settle into a steady shape. This may be the simplest experimental example of a system displaying competition between chaos and order.
26 November 2007 in Applied Physics Letters
Improvement of light extraction efficiency of InGaN quantum wells light emitting diodes (LEDs) using SiO2/polystyrene microspheres was demonstrated experimentally. The utilization of SiO2/polystyrene microlens arrays on InGaN quantum wells LEDs, deposited via rapid convective deposition, allows the increase of the effective photon escape cone and reduction in the Fresnel reflection. Improvement of output power by 219% for InGaN quantum wells LEDs emitting at peak wavelength of 480nm with SiO2/polystyrene microspheres microlens arrays was demonstrated.
24 July 2009 in Optics Express
Improvement of light extraction efficiency of InGaN light emitting diodes (LEDs) using polydimethylsiloxane (PDMS) concave microstructures arrays was demonstrated. The size effect of the concave microstructures on the light extraction efficiency of III-Nitride LEDs was studied. Depending on the size of the concave microstructures, ray tracing simulations show that the use of PDMS concave microstructures arrays can lead to increase in light extraction efficiency of InGaN LEDs by 1.5 to 2.0 times. Experiments utilizing 2.0 micro n thick PDMS with 1.0 micron diameter of the PDMS concave microstructures arrays demonstrated 1.70 times improvement in light extraction efficiency, which is consistent with improvement of 1.77 times predicted from simulation. The enhancement in light extraction efficiency is attributed to increase in effective photon escape cone due to PDMS concave microstructures arrays.
2 June 2009 in IEEE Journal of Selected Topics in Quantum Electronics
Improvement of light extraction efficiency of InGaN LEDs using colloidal-based SiO2/polystyrene (PS) microlens arrays was demonstrated. The size effect of the SiO2 microspheres and the thickness effect of the PS layer on the light extraction efficiency of III-nitride LEDs were studied. The monolayer rapid convective deposition conditions for SiO2 microspheres were also investigated. Ray tracing simulations show that the use of microlens arrays can lead to increase in light extraction efficiency of InGaN LEDs by 2.64 times. This is consistent with experiments that demonstrated 2.49 times improvement in light extraction utilizing SiO2/PS microlens arrays. The enhancement in light extraction efficiency is attributed to increase in effective photon escape cone due to SiO2/PS microlens arrays, and reduced Fresnel reflection within the photon escape cone due to the grading of refractive index change between GaN/SiO2/PS/air interface.