This paper presents a 4th order 20kHz 16MHz programmable-bandwidth active RC filter. For high linearity performance, the gain-boosted opamp in the biquad adopts negative resistance in auxiliary amplifiers to achieve high-gain without requiring extra common-mode feedback amplflifier, thereby minimizing total current and design complexity. To further enhance the filter linearity, a source follower using native NMOS transistors generates common-mode output without adding extra resistive loading to the opamp output. The prototype filter is fabricated in 65nm CMOS and occupies 0.098mm2. It features three programmable cutoff frequencies of 20kHz, 2MHz, and 16MHz and achieves IIP3 of 22.1dBm while consuming 19mW under 1.8V supply. The measured figure-of-merit considering the linearity, power, bandwidth, noise, and silicon area shows that the presented filter achives best-in-line compromise among conflicting design metrics.