Opening charge transport pathways: In perovskite solar cells, the insulating nature of passivation layers needed to boost open-circuit voltage also increases the series resistance of the cell and limits the fill factor. Most improvements in power conversion efficiency have come from higher open-circuit voltage, with most fill factor improvements reported for very small-area cells. Peng et al. used a nanostructured titanium oxide electron transport layer to boost the fill factor of larger-area cells (1 square centimeter) to 0.84 by creating local regions with high conductivity. Science , this issue p. 390
Organic–inorganic metal halide perovskite solar cells represent the fastest advancing solar cell technology in terms of energy conversion efficiency improvement, as seen in the last decade. This has become a promising technology for next-generation, low-cost, high-efficiency photovoltaics including multi-junction tandem cell concepts. Double-junction tandem cells have much higher efficiency limits of 45%, beyond the Shockley–Queisser limits for a single-junction solar cell. In this review, recent progress with the perovskite tandem solar cells is highlighted, in particular, with 2-terminal perovskite–Si, perovskite–CIGS [where CIGS = Cu(In,Ga)(S,Se)2], perovskite–organic photovoltaic, perovskite–perovskite, and 3-junction-perovskite tandems. The opportunity and challenges of two-terminal monolithic perovskite tandems are discussed including a roadmap of strategies for further improving their efficiencies.
High bandgap perovskite solar cells are integral to perovskite‐based multi‐junction tandem solar cells with efficiency potentials over 40%. However, at present, high bandgap perovskite devices underperform compared to their mid bandgap counterparts in terms of voltage outputs and fill factors resulting in lower than ideal efficiencies. Here, the low fill factor aspect of high bandgap perovskite is addressed by developing a cation‐diffusion‐based double‐sided interface passivation scheme that simultaneously provides bulk passivation for a 1.75 eV perovskite cell that is also compatible with a p‐i‐n cell architecture. The champion cell achieves a record fill factor of 86.5% and a power conversion efficiency of 20.2%. Results of ionic distribution profiling, Fourier transform infrared spectroscopy, and X‐ray diffraction crystallography reveal evidence of cation diffusion from the surface perovskite passivation layer into bulk. The diffused cations reduce Shockley–Read–Hall recombination in the perovskite bulk and at the surfaces with the latter being more dominant as confirmed by light‐intensity dependent and temperature‐dependent open‐circuit voltage measurements as well as thermal admittance spectroscopy. This concurrent bulk and surface passivation scheme renders record fill factor and efficiency in the double‐side passivated cells. This provides new insights for future passivation strategies based on ionic diffusion of functionalized materials.