20 April 2016 in IOP Conference Series: Materials Science and Engineering
Cast iron with 3 wt. % Cu was prepared by induction melting and casting in sand molds. The structure of the samples was studied using light microscopy (LM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The addition of Cu promoted formation of pearlite and slightly decreased the volume fraction of graphite. No Cu inclusions were found by LM and SEM. The nanoprecipitations of ε-Cu in lamellar pearlite were observed by TEM. The properties of the Cu-alloyed cast iron were compared with the properties of cast iron not alloyed with Cu. The hardness of cast iron after alloying with Cu increased and the friction coefficient decreased in comparison with the reference sample.
1 August 2017 in Materials Characterization
1 July 2018 in Metal Science and Heat Treatment
28 September 2016 in Physics of Metals and Metallography
1 October 2014 in Applied Mechanics and Materials
The effect of Cu addition on structure and mechanical properties of the gray cast iron is studied. Copper is showed to affect the graphitization process. Copper content increase up to 6 ... 7 wt. % reduces the depth of the chill layer.With further increase of coppercontent the alloys tendency to chilling effectincreases.When the cast ironcontains from 0 to ~ 7% Cu, inclusions can’t be detected using only optical microscopy. In the cast iron with 14.7% Cu, distribution of inclusions has two peaks: 30 ... 40 ... 150 microns and 160 microns. Out-of-shape cupric inclusions of the size of ~ 1 micron are detected in the ledeburite cementite.Submicron inclusions are observed in the lamellar pearlite colonies. With increase of copper content up to ~ 7 wt. % cast iron hardness and microhardness of pearlite increases.