This paper presents a novel method of decoupling inverted-F antennas (IFAs) with high-order modes of ground plane in fifth-generation (5G) mobile multi-input multi-output (MIMO) platform. The proposed method is illustrated in a dual-antenna 5G mobile platform operating at 3.5 GHz. An IFA excites a high-order mode of field distribution in the ground plane at 3.5 GHz. The electric field (E-field) of the excited high-order mode forms several stable null-amplitude field points located on the edge of the ground plane. The other IFA is then placed in one of the stable null points. By doing this, the two IFAs are decoupled with high isolation. The simulated results show that isolation improvements of 20.40 dB can be achieved when the positions and orientations of the two IFAs are optimized. The measured results confirm that the fabricated antennas have peak isolations of 45.56 dB. Finally, the proposed method is applied to design a three-IFA-based MIMO platform which verifies that the suggested concept can effectively simplify the decoupling mechanism and works well in a multi-antenna based mobile MIMO terminal.
30 October 2017 in IEEE Transactions on Antennas and Propagation
This communication presents a planar ultra-wideband multiinput multi-output antenna with pattern diversity and isolation improvement based on the theory of characteristic modes. The proposed antenna (for new-generation wireless mobile terminals) consists of two ultra-wideband antenna elements — a compact quarter loop and a circular planar monopole located on the opposite edges of a rectangular ground plane. These two antenna elements are able to excite different modes in the ground plane and thus realize the desired diverse radiation patterns and high isolation without any additional decoupling structures. The experimental results show that both antenna elements are ultra-wideband with impedance bandwidths (return losses more than 6 dB for the quarter-loop antenna and more than 10 dB for the circular planar monopole antenna) of 130% (2–9.5 GHz). The isolation is over 20 dB with a peak value of 50 dB. The realized gains are above 1.5 dBi. The total efficiencies are above 70%. The envelope correlation coefficient is less than 0.03 assuming that the antenna operates in an isotropic channel.
29 April 2020 in IEEE Transactions on Antennas and Propagation
A novel hybrid reflection method is proposed to realize wideband gain enhancement and radar cross section (RCS) reduction properties for Fabry-Perot (FP) antennas. This method adopts two kinds of Frequency Selective Surface (FSS) units, which are etched on both sides of a single-layer substrate with chessboard arrangement to operate separately as a Hybrid Surface (HS) and a Reflective Surface (RS), to form a Hybrid Partially Reflecting Surface (HPRS). The two FSSs with different positive reflection phase gradient bands and reflection amplitudes collaborate to expand the 3-dB gain bandwidth and improve the gain enhancement on the RS. Meanwhile, the different compensation phases of the two FSSs can redirect reflected waves to reduce the RCS on the HS, and phase cancellation is applied between the retransmitted waves and reflected waves to further reduce the RCS. The simulated and measured results verify the correctness of the proposed method. The prototyped FP antenna has a measured 10-dB impedance bandwidth of 8.64-12.07 GHz (33.1%), a 3-dB gain bandwidth of 8.6-11.1 GHz (25.4%) with a peak gain of 17.08 dBi at 9.5 GHz, and an RCS reduction bandwidth of 8.6-14 GHz with a peak RCS reduction of 19.5 dB.
18 February 2022 in IEEE Antennas and Wireless Propagation Letters
In this letter, a compact high-isolated multiple-input–multiple-output (MIMO) antenna module based on a chip capacitive decoupler is proposed for the fifth-generation (5G) smartphones. The antenna module consists of two feeding ports, radiating metal strips, and a chip capacitive decoupler within a compact size of 16 × 6 mm 2 . In this design, two L-shaped metal strips are used as distributed capacitors to compress the size of the module. Meanwhile, a chip capacitive decoupler is added to improve isolation between the two feeding ports, which is realized with an analysis of common and differential modes. In addition, spiral slots are used to adjust the isolation between the modules. A prototype MIMO antenna with four such dual-port antenna modules was tested in the 3.5 GHz band. The measured –6 dB bandwidths of the two ports are 310 MHz (3.42–3.73 GHz) and 360 MHz (3.33–3.69 GHz), respectively, and the isolation is 24 dB at 3.5 GHz. The measured efficiencies are 60.5% and 52.7% at 3.5 GHz. The compact MIMO antenna module with high-isolation property provides a hopeful solution for the 5G mobile terminals.
A Fabry–Perot (FP) antenna with high gain-bandwidth product (GBP) and wideband radar cross section (RCS) reduction is proposed using an embedded chessboard polarization conversion metasurface (CPCM). A polarization conversion metasurface (PCM) unit and its mirror unit are etched on both sides of a dielectric substrate with chessboard arrangement to form a CPCM. The in-band and out-of-band low-RCS features of the FP antenna are realized by destructive interference, and the high GBP is attributed to the FP resonant cavity. Moreover, an additional small CPCM designed for another PCM unit is embedded into the original CPCM to construct an embedded CPCM, which helps to improve in-band RCS reduction and has a positive effect on gain enhancement and 10-dB impedance bandwidth. The measured results show that the FP antenna with embedded CPCM has a 10-dB return-loss bandwidth of 8.48-12.21 GHz (36.1%), a GBP of 1338, a 3-dB gain bandwidth of 8.9-11.5 GHz (25.5%) and a maximum realized gain of 17.2 dBi. Meanwhile, the measured RCS reduction band covers 8–26 GHz (105.9%) with a peak RCS reduction of 21.2 dB at 9.4 GHz.
25 July 2022 in IEEE Antennas and Wireless Propagation Letters
This letter presents a millimeter-wave (mmWave) ultrawideband tightly coupled dipole array (TCDA) for vehicle communication. The designed array antenna has eight dipole unit cells arranged in one dimension. A special Marchand balun with comb-type perforated structure is developed to realize the unbalance-to-balance transformation and match the impedance. The proposed unit cell of the array achieves a 1:7.6 bandwidth (5.7 GHz--43.3 GHz) with active reflection coefficient less than −6 dB during the simulation. Meanwhile, the antenna achieves a low profile of 0.087 λl, where λl is the free-space wavelength at the lower cut-off frequency. Then, a prototype with scanning angle up to 45° is fabricated and measured to validate the proposed structure. The measured realized gain of the array is 8 dBi at the center frequency of 18 GHz. The measured and simulated results are in good agreement, which confirms the simulation results and validate the proposed design.