In this paper, we present a prototype method for 3D localization of UHF RFID tags by a moving robot. The proposed method represents an extension of Phase ReLock, in 3D space. Phase measurements are collected by at least two antennas, thus a multi-antenna synthetic aperture is created. We propose a new optimization problem, which involves measurements from all different antennas. Thanks to phase-unwrapping, the new multi-antenna optimization problem preserves its convex-like properties. Consequently, it is solved rapidly by standard optimization techniques. Furthermore, we introduce a confidence metric that can identify measured data, which deteriorate the accuracy of the estimations. These can be removed from the measurements' dataset. We have conducted extensive measurements, employing four antennas on top of a SLAM-enabled robot; i.e., the robot is able to create a map of the unknown environment and continuously estimate its pose inside the map. The proposed method outperforms prior art with respect to accuracy and computation time. It achieves mean 3D error less than 20cm with an estimation-time of only 0.17s per tag on an average laptop.
31 January 2022 in IEEE Journal of Radio Frequency Identification
In this paper we design and construct a mobile handheld human operated device used to guide the user towards the desired RFID-tagged target, and at the same time provide estimations of the distance and the angle from the user to the target. The main components of the device are a UHF RFID reader operating with one antenna and an Inertial Measurement Unit (IMU), used to measure rotation angles. During the movement of the operator, phase of arrival and rotation angle data are collected by the RFID reader and the IMU respectively. A particle filter algorithm leverages the collected data to estimate the distance and angle of the operator, with respect to his/her current pose. As more iterations are completed, the fusion of multiple measurements improves the estimation performance. Experimental results show a mean angle estimation error of ~6°, and distance estimation error less than $0.5m$ when the user approaches the target after few iterations. Recorded computational time is small-enough to enable real time tracking-applications.
23 June 2023 in IEEE Journal of Radio Frequency Identification
This work addresses the problem of the global localization of a mobile robot by exploiting RFID technology. The robot is equipped with kinematic sensors capable of measuring the incremental distances covered by each wheel and an RFID reader which measures the phase of the signal that is backscattered by reference RFID tags situated inside the environment at known positions. The motion of the robot with respect to the tags enables the collection of measurements from multiple antenna-locations, in a synthetic-aperture sense. Localization of the mobile robot over time is accomplished by processing short segments of trajectory during each iteration. The odometry-data are exploited to estimate each segment of the vehicle’s trajectory relative to an unknown initial position. The odometry-based estimation, the known positions of the reference tags, the unwrapped phase measurements and a phase-to-distance model represent the input to a data-fit problem, the solution of which reveals the unknown initial position and orientation of the trajectory segment in the absolute frame. Thanks to phase unwrapping, the data-fit problem features convexity-type properties and the solution is rapidly found by non-linear optimization techniques. The influence of different algorithmic features on the performance of the method is investigated in a simulative context. An experimental campaign that employs a prototype robotic agent equipped with two antennas reports a mean absolute localization error of less than 0.1m, while the execution time stays below the measurements’ collection-time such that the real-time capability of the method is preserved.
20 January 2021 in IEEE Journal of Radio Frequency Identification
In this article we propose a novel method for tracking a moving UHF RFID tag in 3D space. The tag moves in an area monitored by at least two antennas fixed at known locations. Phase measurements from each antenna are collected. Assuming a grid of N initial positions, we calculate N possible trajectories, by deriving closed form expressions, exploiting only the phase measurements collected by each antenna separately. Then, using the measured phase-difference from each antenna-pair, a hyperbola's branch on which the tag must be located is calculated. We evaluate the distance of each trajectory from the hyperbolas. Finally, we select the trajectory that minimizes the distance. Experimental results, conducted with a SLAM (Simultaneous Localization and Mapping)-enabled robot show a mean error less than 20cm with estimations derived in the order of ms. Compared to prior art, the proposed method does not assume neither knowledge of the trace, nor of the initial position of the tag. Furthermore, it accomplishes high accuracy at reduced computation time.
11 March 2022 in IEEE Journal of Radio Frequency Identification
In this paper we propose a novel real-time tracking method of a moving UHF-RFID tag. The purpose is to track the interests of RFID-tagged visitors inside a museum from a set of fixed antenna-installations. Two antenna pairs collect phase-measurements from the target tag. Phase differences are calculated for each pair and then mapped to distance-differences of the target-tag from the two antennas. The latter corresponds to a hyperbola for each pair of antennas. The intersection of the two hyperbolas denotes the position of the tag. The cross section of the hyperbolas is derived by a trained neural network. The proposed method neither requires knowledge of the tag’s initial position nor the trace followed (e.g., conveyor belt). Its computational complexity allows for real-time applicability. Experiments were conducted inside multipath-rich laboratory environments. Two types of experiments were conducted to validate the performance of the algorithm. Firstly a tag was placed on a moving robot, which estimated its own position at cm accuracy, thanks to its lidar sensor, representing the ground truth. Secondly a tag was placed on an ArUco Marker which was carried by a human following various trajectories. The proposed method achieved tracking with mean error under 0.5m throughout the experimental campaigns.
23 January 2023 in IEEE Journal of Radio Frequency Identification
In this paper a prototype method for manual inventorying and real-time 3D localization of RFID tagged products by a low-cost handheld UHF RFID reader is introduced. The device is equipped with a UHF RFID reader and an optical camera. "ArUco" markers with RFID tags are placed at known positions. Those optical and RF landmarks are used for the estimation of the pose of the handheld reader over time, by fusing the corresponding measurements in a Kalman filter. The reader also measures RFID tagged items at unknown locations. The positions of the tags are estimated by unwrapping the collected phase measurements, combined with the estimated antenna trajectory. Experimental results show that increased accuracy can be achieved by increasing the spatial density of the optical and RFID markers. The proposed method is expected to enhance low-cost manual inventorying, delivering 3D localization of the tagged products.