Hongshuai Ma

Hongshuai Ma

Auto-generated profile, based on publicly available information

Hongshuai Ma

Key Laboratory of Micro/Nano Devices and Systems, Ministry of Education, North University of China, Taiyuan, China

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 March 2024 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
HMHongshuai Ma
Hongshuai Ma
RLRuikang Liu
Ruikang Liu
JZJUAN ZHANG
JUAN ZHANG
JPJunqi Pang
Junqi Pang
QTQiulin Tan
Qiulin Tan
We present a miniaturized and laminated metamaterial (MM) block, which is formed using an extremely compact stacked unit cell consisting of a double-layer spiral connected in series with a chip capacitor, with a lateral size on the order of 1/20000 of the operating wavelength. The unit cell enables the construction of an MM sample with an operating frequency as low as 325 kHz, provided a 1.8 nF capacitor and the stacking compactness is configured as 1.05. A RLC circuit simulation method is proposed to extract the relative permeability of the low-frequency MM block with three-dimensional layout, which eliminates the wave-port configuration and two-dimensional boundary limitations. Experiments confirm that the proposed MM block has enhanced resonant strength at lower resonant frequencies. Efficiency measurements performed for a wireless power transmission (WPT) prototype reveal 34.5% enhancement of the power transmission efficiency (PTE) at a 120 mm working distance using the fabricated MM sample, which is nearly three times that of the original prototype. In addition, the anti-misalignment performance of the coils is tested at a 100 mm distance, revealing an enhanced misalignment tolerance of 58.3% using the MM sample when the target PTE is set to 80% that of the alignment case. This excellent performance and compact size make the proposed laminated MM block extremely attractive for many low-frequency WPT applications with limited dimensions, such as telemetry systems for rotating machineries.

7 March 2025 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
HMHongshuai Ma
Hongshuai Ma
PZPenghui Zhang
Penghui Zhang
JZJUAN ZHANG
JUAN ZHANG
JPJunqi Pang
Junqi Pang
NZNan Zhang
Nan Zhang
QTQiulin Tan
Qiulin Tan
Current simultaneous wireless power and signal transmission (SWPST) systems have a rather limited transmission distance because the power transmission efficiency (PTE) and signal transmission gain (STG) decrease rapidly with increasing distance. To address this issue, a novel miniaturized hybrid metamaterial block (HMB) with negative and near-zero permeability is designed based on two types of compact metamaterial stacks. Depending on the magnetic field boundary conditions, the magnetic fields for transmitting power and signal can be more confined between the coupling coils, thus enhancing the PTE and STG. An optimization design method for miniaturizing the metamaterials stacks is presented, achieving enhanced Q factors at low resonant frequencies. Furthermore, a resonant hybridization analysis method is proposed to achieve the target resonant frequencies of the metamaterial stacks and the miniaturization of the overall HMB. Finally, an SWPST prototype with dual-sided LCCL compensation networks is built, demonstrating a 16.3% improvement in the PTE and 11.8-dB enhancement in the STG at a 14-cm distance. The enhancement of the signal-to-noise ratio (SNR) from −6 to 2.2 dB enables data flowing at a 400-kb/s rate to be recovered. These results show that the proposed HMB can simultaneously improve the PTE and SNR over a longer transmission distance.

11 March 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
JPJunqi Pang
Junqi Pang
ZSZe Shang
Ze Shang
LZLei Zhang
Lei Zhang
YQYongqiang Qin
Yongqiang Qin
XZXiangxiang Zhang
Xiangxiang Zhang
QTQiulin Tan
Qiulin Tan
Surface heat flux density is critical for aerospace components, especially engine blades and turbine disks that operate at high temperatures. Conventional water-cooled sensors are impractical for in-situ testing, and thin-film heat flux sensors have limited high-temperature durability. To overcome those shortcomings, this study proposes a design method for the high-temperature heat flux sensor (HTHFS) that eliminates the need for a water-cooled structure and has excellent high-temperature performance. The HTHFS features a three-layer coated structure comprising a 99% Al2O3 ceramic substrate, PtRh10/Pt thermopile sensitive layer, and composite ceramic thermal resistance layer (TRL). The effective hot junctions of the HTHFS contact the heat source directly, while the rest of the sensor surface is coated with the TRL of low thermal conductivity and high temperature resistant. The proposed design improves the oxidation resistance, sensitivity, and transient response. The HTHFS was fabricated using screen- printing and air spraying processes. Repeatability, stability, and temperature resistance test results for the HTHFS reveal that the average heat flux at 1400 °C was 403.27 kW/m², with a sensitivity of 3.58 μV/(kW/m²). The dynamic response time (T90), measured via the laser impulse response method, was 1.08 ms. Notably, the HTHFS operated at 1400 °C for more than 5 h without failure. Characterized by low thermal impedance, high-temperature resistance, rapid response, and high reliability, the HTHFS can accurately measure the heat flux, making it highly valuable for in-situ sensing applications in high-temperature aerospace components.

1 July 2024 in AIP Advances
Verified
Journal Article
Open access
PDF file
RLRuikang Liu
Ruikang Liu
HMHongshuai Ma
Hongshuai Ma
LZLei Zhang
Lei Zhang
QLQian Li
Qian Li
JPJunqi Pang
Junqi Pang
QTQiulin Tan
Qiulin Tan
Wireless Power Transmission (WPT) is widely used. In practical engineering applications, the transmitter and receiver of a stable and reliable WPT system need to establish not only a power transmission channel but also a data transmission channel to realize closed-loop control and information interaction. In this paper, a novel simultaneous wireless power and data transfer system based on a series–parallel (SP) resonant network is proposed. The system integrates an SP higher-order resonant network with series carrier injection, which makes power transmission and data transmission share a magnetic coupling channel. The isolation between power and data is realized by exploiting the frequency characteristics of the compensation network, thus realizing efficient power transmission and data transmission. In this paper, accurate and detailed mathematical modeling of the system is conducted, and the gain characteristics of the power transmission channel and the data transmission channel are demonstrated. Meanwhile, the mutual interference between the two channels is analyzed, and a feasible and effective parameter design method is developed. Finally, an experimental prototype with an output power of 16 W and a backward data rate of 100 Kbps is constructed to verify the feasibility of the proposed system and the correctness of the parameter design.