1 April 2015 in Electrochimica Acta
24 April 2020 in New Journal of Chemistry
Using chemical design, computational modelling, structure–activity and structure–property relationships, with high-throughput solution and coating assays we can rapidly identify prime corrosion inhibitor candidates for further detailed evaluation.
23 August 2018 in Journal of the Electrochemical Society
A solid-contact Mg2+ ion-selective microelectrode (ISME) usually consists of a carbon fiber coated with conducting polymer, such as electropolymerized 3, 4 ethylenedioxythiopene (PEDOT), in contact with the ion-selective membrane. PEDOT is typically electrochemically deposited onto the carbon fibers from rather expensive ionic liquid based dopants. Herein, Mg2+ ISMEs were assembled using a commercially available Mg2+ ionophore-containing solution and PEDOT electrochemically deposited from sodium p-toluenesulfonate, thus providing a simple and inexpensive method to develop Mg2+ ISMEs. The ISME fabricated by this procedure is successfully able to respond to Mg2+ ion concentrations arising from pure Mg during free corrosion and also galvanic corrosion (when Mg is coupled to pure iron).
10 February 2026 in SSRN Electronic Journal
A long cycle-life high-power energy storage device is prototyped where the fast charge capability is focused on rather than the fast discharge capability. Instead of using a supercapacitor device, the reworking and engineering of a Li-ion device is prototyped. The aim of the work was to be able to charge in a matter of minutes without excessive degradation in capacity and without a significant increase in device resistance with continued cycling. To achieve these goals, a Lithium Iron Phosphate – Lithium titanate (LFP-LTO) chemistry was selected, with a number of modifications, such as reduced electrode loadings, lowering the active material content to 70%, while increasing the conducting carbon content including carbon fibre additives. These measures overall reduce the energy density to about 42 Wh kg-1. Other measures are incorporated to improve the cycle life and power. More than 85% capacity retention is achieved at 20C or 3-minute charging. Also, a long cycle life of over 27,000 full State-of-Charge cycles at high rate 15C/5C charge/discharge with little increase in resistance (<10%) concurrent with the capacity fade to 80% is achieved. Consequently, at CSIRO-Australia, we have designed a long-life high-power energy storage device ideal for a range of applications.