26 September 2019 in Rare Metals
25 November 2019 in IEEE Transactions on Industry Applications
This paper presents a fully zero-voltage-switching (ZVS) method and an optimal variable on-time (VOT) control for predictive boundary conduction mode (BCM) boost PFC converter. The operation analysis of BCM boost PFC converter which considers the parasitic capacitances is performed. Based on the analysis, a novel Taylor-approximation method to derive the equations of switching off-time for achieving fully ZVS is proposed. Then, an inductor current approximation method is applied to derive the VOT equation in order to reduce the input current THD. A calculation method for selecting the accurate parasitic capacitances is proposed. Most importantly, the derived equations for achieving ZVS and VOT control are simple and take short calculation time in DSP controller, thus they can be applied to the predictive control. Experimental results demonstrate that the fully ZVS operation can be achieved by the proposed ZVS method. The input current THD is indeed improved by the optimal VOT control.
15 May 2023 in IEEE Transactions on Industry Applications
This paper proposed a novel analog-based critical conduction mode (CRM) control method for the three-phase three-level Vienna rectifier. By the proposed method, the simple analog CRM control can be achieved in each phase of the Vienna rectifier. All the control schemes are implemented with three low-cost analog CRM PFC IC controllers. The operation analysis of the CRM Vienna rectifier considering the parasitic capacitances is performed. Experimental results demonstrate that the valley-switching (VS) for IGBTs and the zero-current-switching (ZCS) for diodes are indeed achieved. A relatively high efficiency, a low input current total harmonic distortion, and a high power factor are tested at a 5.8 kW three-phase Vienna rectifier.
1 January 2018 in Nonlinear Theory and Its Applications, IEICE
This paper presents four topics of digital control approaches to apply future-oriented power converters. The energy flow in power conversion system becomes complex due to the implementation of renewable energy sources. In order to control the energy flow in high performance, the artificial intelligence technologies are expected to be implemented to control the complex power conversion system in the future. The digital control approaches for achieving high performance of switching power converters are proposed as basic researches to apply artificial intelligence technologies. They are discussed and the future research orientations are clarified based on the discussion.