Recent energy efficient illumination advancements have capitalized on using light-emitting diodes (LEDs) in combination with freeform lenses. However, the available freeform lens design methods are application specific. In addition, manufacturing of this class of optics is challenging. In this work, considering manufacturing constraints, we apply a customized algorithm to design freeform lenses for (1) transforming LED radiation into a uniform rectangular illumination pattern and (2) shaping collimated LED light beams into complex image target irradiance distributions. The algorithm is based on a numerical solution of the elliptic Monge–Ampère equation. Then, we proposed manufacturing these lenses using a modified ink-jet 3D printing technology called Printoptical technology. The demonstrated optical performance of printed lenses, exhibiting surface roughness of $\textrm {RMS} = 10\pm 2$ nm, is in good agreement with the simulation. We also explored an industrial application of the 3D-printed lens matrix for low-cost illumination of a paper milling machine.
16 October 2017 in The Journal of Physical Chemistry C
Chelating oxygen and nitrogen donor ligands (1,2-dimethoxyethane, 1,3-dimethoxypropane, andN,N′-diethylethylenediamine) are found to dictate the crystal structure formation of MgCl2, the important support component of a polymerization catalyst.
Exhaust gas aftertreatment systems play a key role in controlling transportation greenhouse gas emissions. Modern aftertreatment systems, often based on Pd metal supported on aluminum oxide, provide high catalytic activity but are vulnerable to sulfur poisoning due to formation of inactive sulfate species. This paper focuses on regeneration of Pd-based catalyst via the decomposition of alumina-supported aluminum and palladium sulfates existing both individually and in combination. Decomposition experiments were carried out under hydrogen (10% H2/Ar), helium (He), low oxygen (0.1% O2/He), and excess oxygen (10% O2/He). The structure and composition of the model catalysts were examined before and after the decomposition reactions via powder X-ray diffraction and elemental sulfur analysis. The study revealed that individual alumina-supported aluminum sulfate decomposed at a higher temperature compared to individual alumina-supported palladium sulfate. The simultaneous presence of aluminum and palladium sulfates on the alumina support decreased their decomposition temperatures and led to a higher amount of metallic palladium than in the corresponding case of individual supported palladium sulfate. From a fundamental point of view, the lowest decomposition temperature was achieved in the presence of hydrogen gas, which is the optimal decomposition atmosphere among the studied conditions. In summary, aluminum sulfate has a two-fold role in the regeneration of a catalyst—it decreases the Pd sulfate decomposition temperature and hinders re-oxidation of less-active metallic palladium to active palladium oxide.
16 September 2016 in The Journal of Physical Chemistry C