A nonconformal and nonoverlapping domain decomposition (DD) scheme for surface integral equations is presented to analyze electromagnetic scattering from electrically large and complex perfect electric conducting objects. In this work, a discontinuous Galerkin approach is employed to avoid the introduction of artificial touching faces between adjacent subdomains. To weakly enforce the current continuity at the cutting contours of these subdomains, a novel interior penalty term is defined so that the error energy associated with the error charges can be minimized. Consequently, without the introduction of a stabilization term that relies on the line integral over interactions of nonmatching meshes, the proposed method provides an effective DD preconditioner and requires no effort to be extended to curvilinear elements for higher modeling accuracy. To show this, curvilinear Rao-Wilton-Glisson basis functions defined over curvilinear elements are employed in this work to demonstrate the accuracy and efficiency of the proposed DD scheme.
7 September 2023 in IEEE Transactions on Antennas and Propagation
This work proposes an asymmetric antenna-filter-antenna (AFA) based frequency selective surface (FSS) with quasi-elliptic bandpass response and polarization selectivity. According to the reciprocity theorem, radiation nulls of antennas can be used to introduce transmission zeros (TZs) of AFA-based FSSs. The proposed FSS consists of two patch antennas with different slots, a ground and a metallized via connecting two patch antennas. The antenna’s radiation nulls are generated by slots embedded in the patches, which act as a notch band and can be used to modulate the FSS frequency response with two TZs by varying the length of slots. The high frequency selectivity performance of FSS can be achieved without additional circuits or multilayer structures. For a potential application, we design a filtering folded reflectarray (FRA) by using the proposed FSS as its sub-reflectarray. The filtering characteristic of the proposed FRA, with steeper frequency response and flat gain in the passband, can be obtained. A prototype of filtering FRA is fabricated and measured. Good agreement is obtained between simulated and measured results.
8 July 2021 in IEEE Transactions on Antennas and Propagation
In this article, a nonconformal domain decomposition method (DDM) based on the hybrid finite element method (FEM) and boundary element method (BEM) is proposed to solve arbitrary 3-D anisotropic (including bianisotropic and single anisotropic) multiscale composite objects. The object is divided into interior and exterior regions. The interior region is solved by the bianisotropic finite element domain decomposition method (FEM-DDM), and the exterior region is solved by the discontinuous Galerkin (DG) method based on the combined field integral equation (CFIE). In order to decouple the electric and magnetic fields of the bianisotropic object, a new finite element–boundary element–domain decomposition method (FEM-BEM-DDM) formulation is derived. To ensure the continuity of electric current and electric field between anisotropic FEM subdomains, a new auxiliary current is introduced into the interface of different subdomains of FEM and the interface of FEM subdomains with BEM subdomains. The former uses second-order transmission conditions (SOTCs) to ensure continuity, whereas the latter uses Robin transmission conditions (RTCs) to ensure continuity. The BEM dense matrix–vector multiplication is accelerated by a multilevel fast multipole algorithm (MLFMA). The proposed FEM-BEM-DDM allows for nonconformal discretization between any touching subdomains and provides an effective preconditioner. In numerical examples, the accuracy and effectiveness of the method are verified.
15 February 2018 in IEEE Transactions on Antennas and Propagation
Scattering from composite planar thin dielectric-conductor objects is calculated by the hybrid volume-surface integral equation (VSIE) approach. To highly efficient model such objects, the prism elements are used for volume regions instead of general tetrahedral elements, and the simplified prism vector basis functions are proposed so that the volume integral can be simplified into either surface integral or line integral. As a pair, the RWG basis is used for arbitrarily shaped conductor surface. This proposed method has several advantages for objects comprising planar thin dielectric materials. First of all, the use of prism elements can significantly reduce the number of unknowns compared with the general tetrahedral mesh scheme so that the CPU time consumption and memory occupation are reduced. In addition, the prism elements also result in a more convenient meshing procedure. Finally, the simplification of volume integral further reduces the CPU time consumption, while maintaining comparable accuracy. Since the proposed scheme can be easily accelerated by fast algorithms, our VSIE method combined with the multilevel fast multipole algorithm is employed for the scattering analysis from the electrically large objects. Several numerical results are reported to show the good accuracy and efficiency of the proposed method.
19 July 2018 in IEEE Antennas and Wireless Propagation Letters
A nonoverlapping and nonconforming volume-sur-face integral equation (VSIE) domain decomposition method (DDM) using simplified prism vector (SPV) basis functions is presented for complex electrically large composite planar thin dielectric-perfect electric conductor objects. Compared with the recently developed SPV-based VSIE, this scheme considerably accelerates the convergence of iterative solutions by an effective preconditioner resulted from the DDM. Moreover, this DDM does not require imposing continuity conditions at the interfaces between adjacent subdomains, and the use of discontinuous Galerkin approach allows the nonconforming volume discretizations. Due to the nonconforming nature, subdomains can be built up separately, resulting in a flexible and convenient geometrical modeling. For composite subdomains involving thin dielectric layers, the full/half SPV basis is applied so that, in comparison with the generally used Schaubert–Wilton–Glisson basis, the number of unknowns is remarkably reduced. Several numerical examples are reported to illustrate the efficiency and fast convergence of this scheme.
8 August 2024 in IEEE Transactions on Antennas and Propagation
Recently, there has been tremendous interest in studying electromagnetic (EM) metamaterials. However, the full-wave simulations of large and complex metamaterials are challenging. This work proposes a novel technique for efficient and accurate simulations of metamaterials composed of finite types of units. The technique follows the framework of finite element method and boundary element method (FEM-BEM) and treats the metamaterial units by domain decomposition method (DDM). Since there are finite types of units, the various couplings among them, including the self and mutual ones, can be fully captured by analyzing characteristic subarrays. The technique first performs such analyses with low memory and CPU costs and stores the results in a database. The stored data are then used in assembling the system matrix of the overall metamaterial. Thanks to this, it is applicable to large-scale arrays without recourse to overall modeling and meshing. Furthermore, the technique significantly reduces the computational burden since only the inverse matrices of finite types of units are calculated during the iteration process of DDM. The effectiveness and accuracy of the technique are validated by realistic numerical examples. The technique facilitates accurate and efficient analyses of metamaterials and will find practical value in engineering applications, especially the design, optimization, and planning of reconfigurable intelligent surfaces (RISs).