This design proposes a self-grounding semi-circular gap dual-band flexible antenna in the context of the rapid development of wireless body area networks. The antenna combines the slit structure with the characteristics of traditional rectangular monopole antenna to realize dual-band, and achieves the purpose of controlling one central frequency point for each semi-circular slit. In addition, the antenna’s grounding structure adopts the self-grounding structure, which is less used nowadays, to extend the bandwidth. The antenna is designed on a dielectric board of polyimide material with a relative dielectric constant of 3.5. The overall dimensions of the antenna are 44mm*40mm*0.2mm with two different sized gaps in a rectangular patch, similar to the geometry of an umbrella handle. Measured data shows that the structure has higher gain and efficiency in the bent state than in the flat state, making it ideal for wearable smart terminals. It can be combined with a smart armband for sports and medical applications or for a single soldier wearable wristband smartwatch. The article explores the effect of different slot sizes and different bending angles on the performance of the antenna, as well as the specific absorption rate values of the antenna for the human body. Finally, two frequency bands with good omnidirectional radiation characteristics are obtained: 2.38-2.81GHz and 4.28-5.10GHz. The antenna covers ISM, 4G, 5G, Bluetooth, WLAN, and other common communication frequency bands. The results of the study show that the design method is highly reliable.
31 August 2023 in International Journal of RF and Microwave Computer-Aided Engineering
In this study, a flexible multiband fractal antenna mimicking dendrite structure is proposed and designed by combining bionics and fractal theory. The dendritic structure of neurons is extracted and simplified into a simple and clear geometric structure. The initial antenna model is obtained by fractal operation on the geometric structure, and finally, four effective bands are obtained. The antenna is printed on a mm3 polyimide dielectric board and fed by a coplanar waveguide. This paper discusses the effect of the human body on the performance of the antenna and the robustness of the antenna in the bending regime. The gain, efficiency, and cross-polarization of the antenna were tested using a microwave anechoic chamber. The measured antenna covers 1.37 GHz-1.93 GHz (relative bandwidth 35%), 2.25 GHz-2.51 GHz (relative bandwidth 10.7%), 3.13 GHz-3.81 GHz (relative bandwidth 19.3%), and 4.46 GHz-5.5 GHz (relative bandwidth 21.1%) four operating frequency bands. The maximum gain is 6.05 dBi and the maximum efficiency is 91.05%. The antenna can be used for Bluetooth WLAN (Wireless Local Area Network), 4G (4th Generation Communication System), 5G (5th Generation Mobile Communication System), WiMAX (Worldwide Interoperability for Microwave Access), etc. The test results are in good agreement with the simulation results, which proves that the antenna can meet various wireless communication requirements.
21 July 2023 in Wireless Communications and Mobile Computing
This paper presents a multiband planar antenna with a third-order toroidal coupling structure that has potential applications in mobile communications. The antenna is fed using a coplanar waveguide structure. The radiating body model of the antenna is obtained by scaling and nesting twice in equal proportions based on a first-order toroid. The above patch was printed on a 42550.1mm3 polyimide flexible dielectric substrate. This article explores the effect of bending in different directions on the antenna performance and explores the effect of coupling with the human body on the antenna S11. The antenna was simulated using a high-frequency structure simulator and measured in an electromagnetic microwave darkroom. The simulation results of the antenna match well with the measured results, and the maximum gain of its band coverage is 4.39dBi. The antenna can cover the frequency bands of TD-LTE (B-TrunC) (1.4471.467GHz), LTE42/43 (3.43.8GHz), WiMAX (3.33.8GHz), 5G band n78 (3.43.8GHz), WLAN (5.155.35GHz), 5G (5.7255.825GHz), and other commercial bands.
This paper presents a novel double-sided structure multi-band antenna that cleverly combines a Koch snowflake structure with a hexagonal fractal structure; the front of the antenna features a right semicircle minus a half-order Koch snowflake structure, while the back of the antenna showcases a left semicircle minus half of a hexagonal fractal snowflake structure, which are combined together to form a complete circle. The antenna can cover common communication bands such as fourth to fifth generation (5G) commercial bands, ISM, WLAN, and Bluetooth. The structure of the radiator portion of the antenna is designed by iteratively scaling a basic arc shape multiple times based on a certain scale factor, and after simulation and comparison, three iterations can achieve the best antenna performance, and the antenna uses a microstrip line transmission to broaden the antenna bandwidth. The antenna covers three effective frequency bands: 2.38–2.90 GHz (20.3%), 3.35–3.85 GHz (14.1%), and 5.06–5.80 GHz (13.5%). The antenna dielectric sheet is made of RF-35 from Taconic, which has the advantages of high strength, complete surface inertness, and a long service life, with a dielectric constant of 3.5 and actual dimensions of 50 mm × 54 mm × 0.76 mm. The antenna is fractal-iterated in small dimensions, and the approximation of the frequency bands is accomplished by comparing the ratios of each iteration with the current vector map. The antenna was simulated by HFSS software (Version 21). and measured in an electromagnetic anechoic chamber, and the test results were consistent with the simulation results.
In this paper, based on bionics, a flexible multi-band antenna is designed to mimic the structure of a spider’s web, which supports various communication standards such as 4G, 5G, and GPS. The antenna lays out multiple loop branches in a limited space to achieve wideband operations from 1.31 GHz to 2 GHz (42.4%), from 3.4 GHz to 4 GHz (16.2%), and from 5.1 GHz to 5.78 GHz (12.5%). The antenna selects 40 × 50 × 0.1 mm³ polyimide as the dielectric substrate and trapezoidal coplanar waveguide feed. A simulation and experimental analyses demonstrate that the antenna exhibits consistent performance when subjected to different bending scenarios. The design scheme utilizing a flexible dielectric substrate streamlines the integration process, offering a promising avenue for deployment in smart wireless devices. The results of the consistent tests and simulations demonstrate that the device meets the requisite standards for wireless communication.
24 February 2023 in International Journal of RF and Microwave Computer-Aided Engineering
This paper incorporates the structural characteristics of chrysanthemums in nature and fractal geometry theory into the antenna structure design and a novel-structured fractal multiband fractal microstrip antenna with a chrysanthemum petal structure is proposed. The antenna can cover commercial frequency bands from the second to fourth generation (4G), satellite navigation, wireless local area networks, and Bluetooth. The antenna radiator imitates the structure of chrysanthemums petals in nature, and a basic arc shape is iterated many times according to a certain proportional coefficient. After simulation and comparison, the second iteration can achieve the best antenna performance, and the antenna adopted the coplanar waveguide feeding method to broaden the antenna bandwidth. The antenna covers three effective frequency bands of 1.582.68GHz (64.7), 2.764.01GHz (33.9), and 4.685.35GHz (13.4). The antenna dielectric board is made of FR-4 material, the dielectric constant is 4.4, and the actual size is 41291.6mm3. The antenna performs fractal iteration at a small size, and the approximate calculation of the frequency band is completed by comparing the ratio of each ring to the current vector diagram. The design of the antenna is to use HFSS for antenna modeling and parameter optimization, and the model under different conditions were compared and analyzed. By comparing the test results of the antenna prototype with the simulation structure in the electromagnetic anechoic chamber, the rationality of the antenna is verified.