The requirements for the control performances of space manipulators, especially for the stability and accuracy of the attitude control systems of the base spacecrafts, are ever increasing during the space target capturing tasks. However, the system uncertainties caused by parameter variations will degrade the system performances severely. This paper investigates the precise and fast trajectory tracking control problem for the free-flying space manipulator after capturing a space target with uncertain mass. To compensate the system uncertainty with complex and uncertain dynamics, a novel adaptive sliding mode disturbance observer (ASMDO) is proposed. Then, a composite controller with prescribed transient and steady-state performances is developed. It is proved that the estimation error of ASMDO can be stabilized in finite time though the bound of the derivative of system uncertainty is unknown. Meanwhile, the trajectory tracking error can also be stabilized in finite time and has preassigned maximum overshoot and steady-state error. Finally, numerical simulations and experimental studies are presented to demonstrate the effectiveness of proposed methods.
22 March 2019 in IEEE Transactions on Industrial Electronics
This paper is devoted to attitude tracking control of fractionated spacecraft with wireless communication. We consider the practical case that the spacecraft suffers from uncertain inertia parameters, external disturbances and even unknown and time-varying actuator faults. Within the framework of the backstepping method, a novel event-triggered adaptive fault-tolerant control scheme is proposed. In our design, an event-triggering mechanism is introduced to determine the time instants for communication, which successfully avoids continuous communication and Zeno phenomenon. Then, with the aid of a bound estimation approach and a smooth function, the impacts of the actuator faults as well as the network-induced error are effectively compensated for. Moreover, by employing the prescribed performance control technique, it is shown that the attitude tracking errors can converge to predefined arbitrarily small residual sets with prescribed convergence rate and maximum overshoot, no matter if there exist unknown actuator faults. Compared with conventional adaptive attitude control schemes, the proposed scheme significantly reduces the communication burden while providing high reliability and stable, rapid and accurate response for attitude maneuvers. Simulation results are presented to illustrate the effectiveness of the proposed scheme.
11 November 2021 in IEEE Transactions on Industrial Electronics
Multiple disturbances are the main constraints that hinder the high-performance velocity tracking of the gimbal servo system in control moment gyro. This article presents a non-cascade structured velocity-tracking controller based on a refined disturbance observer for handling multiple disturbances and improve the tracking performance. Specifically, a disturbance observer is designed to estimate the imbalance disturbance, which can be represented by an exogenous system. The disturbances that cannot be modeled a priori are treated as a lumped term and estimated via extended state observer. By resorting to disturbance estimation, a novel sliding mode controller based on the disturbance estimation values is developed to handle the mismatched problem and chattering issue. Finally, experimental tests are conducted to verify the effectiveness of the proposed anti-disturbance control scheme.
20 August 2019 in IEEE Transactions on Industrial Informatics
In this paper, a novel spacecraft composite attitude stabilization scheme based on dual disturbances observers (DDOs) and high-precision nonsingular terminal sliding mode control (HPNTSMC) is presented, with explicit consideration of reaction wheel dynamics and multiple disturbances. First, spacecraft attitude coupling dynamics model is constructed covering reaction wheel dynamics and multiple disturbances. These disturbances include matched disturbances caused by motor counter electromotive force (EMF) and equivalent mismatched disturbance caused by reaction wheel friction and environment disturbances. DDOs are designed to estimate both equivalent matched and mismatched disturbances, respectively. Subsequently, the high-precision control scheme is designed to compensate the estimated disturbances and attenuate the influence of estimate errors via composite nonsingular terminal sliding mode attitude controller. The closed-loop stability and convergence are proved based on the Lyapunov stability theory. Finally, hardware-in-the-loop experiments are conducted to verify the effectiveness of proposed spacecraft attitude stabilization scheme.
12 May 2021 in IEEE Transactions on Aerospace and Electronic Systems
For a practical engineering system, disturbances usually have a negative impact on system performance. Especially, when the system physical constraints (e.g., actuator amplitude saturation and input channel constraint) are present, the study for antidisturbance controllability (ADC) is of paramount importance. This article presents the concepts of disturbance estimability, disturbance compensability, and an enhanced antidisturbance control (EADC). From the viewpoint of control system design, an example of spacecraft attitude control is given. The control constraints and multiple disturbances are explicitly analyzed for the sake of attitude control system design of flexible spacecraft. Subsequently, an EADC approach with integration of the disturbance observer-based control (DOBC) and active disturbance rejection control (ADRC) is proposed, based on the characteristics of disturbances exposed. Moreover, prescribed performance approach is incorporated into the spacecraft attitude tracking control. In consequence, the presented control can not only achieve superior antidisturbance capability than DOBC or ADRC, but also quantify the control performances. Numerical simulations and hardware-in-the-loop tests exemplify the applicability of the proposed scheme.
3 July 2018 in IEEE Transactions on Control Systems Technology
This brief investigates the high-precision trajectory tracking control of space manipulator after capturing an unknown target. The neutral uncertainty induced by parameter variation poses great challenges to the controller design. Moreover, the existence of actuator deadzone nonlinearity makes the situation more complicated. In order to address the aforementioned difficulties, a novel control scheme is proposed in this brief. First, to reduce the conservativeness in the descriptions of uncertainties, the dynamic of space manipulator is described by an uncertain system with neutral uncertainty, state-dependent uncertainty, and norm-bounded uncertainty for the first time. Then, by incorporating a novel deadzone compensation control effort, a composite controller is proposed to attenuate these uncertainties and compensate the deadzone nonlinearity. Finally, stability and robustness analyses are carried out, and simulation results are given to demonstrate the effectiveness of the proposed methods.