In this work, we present the magneto-ionic response to ionic liquid gating in Ta/CoFeB/MgO/HfO2 stacks, where heavy metal dusting layers of Ta, W, and Pt are inserted at the Ta/CoFeB and CoFeB/MgO interfaces. Dusting layers of W inserted at the Ta/CoFeB interface increase perpendicular magnetic anisotropy (PMA) by more than 50%, while no significant changes are seen for Pt. In these samples, gating cannot break the PMA seeded at the CoFeB/MgO interface, only relatively small changes in the coercivity can be induced, about 20% for Ta and Pt and 6% for W. At the CoFeB/MgO interface, a significant quenching of the magnetization is seen when W and Ta dusting layers are inserted, which remains unchanged after gating, suggesting a critical deterioration of the CoFeB. In contrast, Pt dusting layers result in an in-plane anisotropy that can be reversibly converted to PMA through magneto-ionic gating while preserving the polycrystalline structure of the MgO layer. This shows that dusting layers can be effectively used not only to engineer magnetic properties in multilayers but also to strongly modify their magneto-ionic performance.
Ir and Pt thickness dependences of the interfacial Dzyaloshinskii-Moriya interaction (iDMI), the perpendicular magnetic anisotropy (PMA), and the damping in Co-based systems grown by sputtering on Si substrates, using Ir or Pt under or overlayer of variable thickness ( and ), were investigated using Brillouin light scattering. Vibrating sample magnetometry measurements revealed a significant decrease of the areal magnetic moment at saturation as the thickness or of the overlayer increases, most likely due to the increasing intermixing. The intermixing, found to be negligible for Ir and Pt underlayers, is stronger for Ir than Pt overlayers. Damping measurements for Pt-based systems allowed us to conclude with the strong spin-pumping contribution. The analysis of the dependence of damping, within the spin-pumping model, allowed us to determine the spin-diffusion length of Pt, found to be greater when Pt is used as an underlayer. The dependence of the effective PMA and iDMI constants, for which similar trends to that of damping were observed, were qualitatively analyzed to separate the contribution of each interface with Co. It was found that these constants are stronger when Co is grown on Pt, most probably due to weaker intermixing at the Pt/Co interface. Linear dependence of damping vs the PMA effective constant was evidenced, confirming their relationship with spin-orbit coupling (SOC). A linear variation of the PMA effective constant vs the iDMI constant was observed in systems using Pt underlayer, whereas quadratic or linear correlations are possible when Pt is used as an overlayer, probably due to change of the interface SOC by the strong intermixing at the Co/Pt interface. The qualitative analysis of the Ir thickness dependence of iDMI and PMA constants revealed a significant (weak) contribution of the Ir/Co interface to PMA (iDMI). The surface iDMI constant of the Co/Ir interface was estimated to be 0.4 ± 0.1 pJ/m, which confirms the similar iDMI sign of Co/Ir and Co/Pt interfaces.
The elastic constants of an epitaxial film of FeRh have been determined experimentally in both ferromagnetic (FM) and antiferromagnetic (AF) phases, using a combination of Brillouin light scattering and picosecond acoustics experiments. The constant is noticeably larger in the FM phase than in the AF phase, while and are both lower, leading to larger Rayleigh wave velocities in the FM phase than in the AF phase. The elastic constants were calculated numerically using first-principles anharmonic modeling and machine-learned interatomic potentials. We find that using a temperature-dependent effective potential is indispensable to correctly reproduce the experimental values to within 80–100%. The accurate knowledge of the temperature- and phase-dependences of the elastic constants of crystalline FeRh are valuable ingredients for the predictive modeling of the acoustic and magnetoacoustic properties of this magnetostrictive material.
Brillouin light scattering and microstrip line ferromagnetic resonance were used to study perpendicular magnetic anisotropy (PMA), magnetic damping, and interfacial Dzyaloshinskii-Moriya interaction (iDMI) in /Fe()/ thin films with varying Fe thickness , where stands for Pt, Ir, or Cu and stands for Ir, Cu, or MgO. A particular interest is given to their temperature dependence. To accurately assess the contribution of each interface with Fe to the effective interface PMA constant, we combined direct measurements of the effective magnetization thickness dependence with the spin waves frequency mismatch. Notably, Ir/Fe and Fe/Ir, as well as Cu/Fe and Fe/Cu interfaces exhibited distinct behaviors: Fe/Ir significantly contributed to PMA and spin pumping induced damping. The damping constant showed a nonlinear dependence on the Fe layer inverse effective thickness, which was linked to a strong interfacial two-magnon scattering, particularly evident in Cu/Fe/Ir and Cu/Fe/Cu structures. Additionally, iDMI measurements revealed an opposite chirality of Pt/Fe and Ir/Fe interfaces. We also investigated how these magnetic interfacial properties vary with temperature in the Pt/Fe/Cu and Cu/Fe/Cu systems. We found that the interface PMA constant increased linearly with temperature, while the iDMI constant decreased significantly, by approximately 60%. This suggests that iDMI is highly sensitive to thermal disorder. Post-temperature measurements indicated that the temperature induces interdiffusion and impacts the magnetic properties through specific effects that are challenging to disentangle in the absence of in situ magnetization measurements.