State Key Laboratory of Solidification Process, Shaanxi Province Key Laboratory of Fiber Reinforced Light Composite Materials, Northwestern Polytechnical University, Xi'an Shaanxi, 710072, PR China
Auto-generated profile, based on publicly available information
Lei Zhou
State Key Laboratory of Solidification Process, Shaanxi Province Key Laboratory of Fiber Reinforced Light Composite Materials, Northwestern Polytechnical University, Xi'an Shaanxi, 710072, PR China
A hybrid control method based on sliding mode observer and predictive functional control is proposed to improve the performance of the linear motor servo system, which is usually characterized by nonlinearity, uncertainty and disturbances. Firstly, the mathematical model of linear motor servo system is established. Then, the sliding mode observer is designed to compensate for the parameter changes and external disturbances, and the disturbance information is fed back to the predictive function controller, and a prediction model with disturbances is established, so as to optimize the control method and improve the control effect of servo system. The simulation results show that the controller based on the sliding mode observer and predictive functional controller can effectively suppress the disturbances and improve the rapid response and steady-state accuracy of the system. As the controller shows strong robustness and anti-disturbance, it can be used to effectively control the servo systems.
A facile pulse arc discharge deposition method was developed to prepare AlPO4 oxidation resistant outer coating on SiC pre-coated carbon/carbon composites (SiC-C/C). The deposition dynamics and the influence of pulse frequency on composition, microstructure and oxidation resistance of the as-prepared coating were investigated. Results show that pulse arc discharge deposition is an effective route to achieve dense and crack-free AlPO4 coatings. The deposition activation energy of the AlPO4 coating is calculated to be 3.07 kJ·mol-1. The AlPO4 coating prepared at a pulse frequency of 2000 Hz exhibits good oxidation resistance, which can effectively protect C/C composites from oxidation in air at 1773 K for 262 h with a weight loss of 1.58%.