Sherzod Kurbanbekov

Sherzod Kurbanbekov

Auto-generated profile, based on publicly available information

Sherzod Kurbanbekov

Kurchatov, Kazakhstan

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 February 2020 in International Journal of Emerging Technologies in Learning (iJET)
Verified
Journal Article
Open access
PDF file
SRSherzod Ramankulov
Sherzod Ramankulov
EDElmurat Dosymov
Elmurat Dosymov
TTTorebay Turmambekov
Torebay Turmambekov
DADilmurad Azizkhanov
Dilmurad Azizkhanov
SKSherzod Kurbanbekov
Sherzod Kurbanbekov
SBSattar Bekbayev
Sattar Bekbayev
The purpose of this study is to determine the possibilities of digital technolo-gies and case study method in the development of creativity of the future teachers in physics teaching through the medium of a foreign language. The Akhmet Yassawi International Kazakh-Turkish University has created computer models of various physical processes and phenomena on the basis of Optics in English training course and has developed a method of their application. Since English opens the way to the formation of creativity, we have evaluated the effectiveness of the methodology we have developed, through the evaluation of creativity. The nearly 73 students were engaged in an experiment presented below in chronological order. The reliability of results obtained at the beginning and at the end of forming stage for each criteria of creativity, as well as for the integral indicator is provided by Pearson criterion . At the beginning of the experiment it is seen that that means there are no differences between the development level of students’ creativity from both experimental and target groups. At the end of the experiment , that means there are significant differences in the development level of students’ creativity.

1 January 2018 in Inorganic Materials
Verified
Journal Article
Closed access
PDF file
BKB. K. Karakozov
B. K. Karakozov
MSM. K. Skakov
M. K. Skakov
SKSh. R. Kurbanbekov
Sh. R. Kurbanbekov
VBV. V. Baklanov
V. V. Baklanov
ASA. A. Sitnikov
A. A. Sitnikov
VYV. I. Yakovlev
V. I. Yakovlev
We have studied the effect of sintering temperature on the structural and phase transformations of alloys produced by the spark plasma sintering of Ti + 23.5 at % Al + 21 at % Nb powder mixtures at...

1 December 2012 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
MSMazhyn Skakov
Mazhyn Skakov
SKSherzod Kurbanbekov
Sherzod Kurbanbekov
MSMichail Scheffler
Michail Scheffler
In the present work the results of electrolytic-plasma treatment influence on the mechanical properties and structural-phase condition of steel’s 12Cr18Ni10Ti surface layers. In the work, the mechanical characteristics of steel’s surface layers are investigated, cemented in electrolytic plasma with the composition 10 % Nа2CO3 and 10 % С3Н8О3. The operational parameters for the processing are determined. The optimal content of components in saturating mixtures plasma by cementation defined. According to the study it is found that, after electrolyte plasma processing, high hardness increased in 2-2.5 times more than in the original condition. The hardened layer with thickness 30-65 µm is formed. It is shown that after the electrolyte-plasma processing of steel 12Cr18Ni10Ti, microstructure contains particles carbides and has fine-grained martensitic structure. The advantages this method are: small energy consumption high speeds annealing opportunity of local surface processing details complex configuration, operating in the conditions intensive loads, easy implementation process.

15 November 2017 in Materials Testing
Verified
Journal Article
Closed access
SKSherzod Kurbanbekov
Sherzod Kurbanbekov
MSMazhyn Kanapinovich Мажын Skakov
Mazhyn Kanapinovich Мажын Skakov
VBViktor Baklanov
Viktor Baklanov
BKBatyrzhan Karakozov
Batyrzhan Karakozov
In this work, effect of spark plasma sintering (SPS) temperature on structure and phase composition (SPC) of Ti-Al-Nb-based alloys produced by SPS technique at 1000 to 1550 °C has been investigated. X-ray phase analysis, raster electron microscopy and energy dispersive X-ray spectroscopy with determination of element distribution were applied to study sintered alloys. It was found that microstructure of alloys sintered at 1000 °C and 1200 °C is heterogeneous. These alloys consist of Ti3Al grains and Nb2Al phase as well as dispersed separations of Ti2AlNb phase and unreacted particles of niobium and titanium. Results of structure and phase analyses showed that these alloys become homogeneous and laminar with increasing sintering temperature.

1 December 2012 in Advanced Materials Research
Verified
Journal Article
Closed access
PDF file
SKSherzod Kurbanbekov
Sherzod Kurbanbekov
МSМаzhyn Skakov
Маzhyn Skakov
MSMichail Scheffler
Michail Scheffler
ANAzret Naltaev
Azret Naltaev
In the present work the results of electrolytic-plasma treatment influence on the mechanical properties and structural-phase condition of steel’s 12Cr18Ni10Ti surface layers. In the work, the mechanical characteristics of steel’s surface layers are investigated, cemented in electrolytic plasma with the composition of 10 % Nа2CO3 and 10 % С3Н8О3. The operational parameters for the processing are determined. The optimal content of components in saturating mixtures of plasma by cementation is defined. According to the study it is found that, after electrolyte plasma processing, high wear resistance and hardness increased in 2-2.5 times more than in the original condition. The hardened layer with thickness 30-65 µm is formed. It is shown that after the electrolyte-plasma processing of steel 12Cr18Ni10Ti, microstructure contains particles of carbides and has a fine-grained martensitic structure.

25 February 2025 in Multidiscipline Modeling in Materials and Structures
Verified
Journal Article
Closed access
Kuat KombayevKuat Kombayev
Kuat Kombayev
GSGulden Sypainova
Gulden Sypainova
Fuad KhoshnawFuad Khoshnaw
Fuad Khoshnaw
YKYernat Kozhakhmetov
Yernat Kozhakhmetov
SKSherzod Kurbanbekov
Sherzod Kurbanbekov
YTYerkezhan Tabiyeva
Yerkezhan Tabiyeva
Purpose: This research aimed to identify the optimal plasma cutting parameters for enhancing the quality and efficiency of steel alloy processing. Systematic experiments, supported by microstructure analyses and the Taguchi method, were conducted to determine the ideal settings for minimizing defects and resource consumption while ensuring high-quality cuts.Design/methodology/approach: The study employed a systematic approach to determine optimal plasma cutting parameters for enhancing steel alloy processing. Experiments were conducted using a Kawasaki RS-010L robotic manipulator, powered by a DS 120P.33 inverter power supply. A range of plasma cutting parameters, including current, voltage, cutting speed and airflow, were carefully examined to achieve high-quality cuts while minimizing resource consumption. The Taguchi method was applied to optimize key responses – cutting angle, cutting width and burr formation – providing deeper insights into the influence of each parameter and identifying conditions for further refinement.Findings: The study successfully identified the optimal plasma cutting parameters for steel alloy processing. Practical experimentation determined that a current of 50 A, voltage of 118 V, cutting speed of 3,200 mm/min and airflow of 1.9 × 10–3 m³/s produced a smooth cutting surface, minimal burr formation and a cutting angle within ±4° relative to the surface. The Taguchi method determined optimal settings to minimize angle and cutting width: 126 V, 4,400 mm/min and airflow of 2.3 × 10–3m3/s for angle and 118 V, 4,400 mm/min and 1.9 × 10–3m3/s for cutting width. Microstructure analysis confirmed uniformity and conformed to International Organization for Standardization 9013:2002 standards for cut quality.Originality/value: This research advances steel alloy processing by combining experimental methods and the Taguchi method to determine optimal plasma cutting parameters for 6 mm thick steel 09G2S, addressing a gap in studies focused on specific materials. Unlike general studies, these results are tailored to low-carbon, low-alloy steels, providing actionable guidance for achieving efficient, high-quality cuts while minimizing waste and improving weldability and ductility. This work contributes to cost-effective and sustainable practices in the metal fabrication industry.