1 August 2025 in Fusion Engineering and Design
1 January 2022 in SSRN Electronic Journal
The cube and tensile samples of reduced activation ferritic/martensitic steel were formed at different laser powers and scanning velocities using selective laser melting process, and the microstructural characteristics and tensile properties of the cube and tensile samples were analyzed in this study. The experimental results shown that the SLMed CLF-1 samples formed with selected laser melting have near-fully dense, and the relative density of SLMed CLF-1 samples exceeds 99%. Meanwhile, numerous nano-sized spherical and needle-like precipitates dispersion distributed in the grains and the boundary of the grains, and the precipitates are mainly composed of M 23 C 6 carbide and MX carbide. The microstructure is that columnar grains and equiaxed grains arranged in sequence, and the smallest average size of grains is 15 µm at the 320 W power with 800 mm/s scanning velocity. In addition, the sample at 320 W power with 800 mm/s scanning velocity exhibits higher yield strength (875 Mpa) and higher elongation (25.6%) than that of the sample at 200 W power with 800 mm/s scanning velocity with yield strength (715 Mpa) and elongation (22.6%).
1 August 2025 in AIP Advances
In this work, we present the first Lyman-Alpha-Based Beam Emission Spectroscopy (LAB) diagnostic system. This system achieves a significantly enhanced radial spatial resolution of ∼3.3 mm compared to conventional BES. The LAB diagnostic monitors the vacuum ultraviolet Lyman-alpha line (n = 2 → 1 transition, 121.53 nm) and has been implemented on the HL-2A tokamak with twenty spatial channels covering the edge plasma region (ρ = 0.73–1.01) for standard HL-2A discharges. Beyond spatial resolution improvements, the LAB system shows over tenfold signal amplification relative to traditional BES. The entire optical assembly has been securely assembled and underwent rigorous testing within a dedicated vacuum chamber interfaced with HL-2A’s main vacuum system. The monochromator provides linear dispersion of ∼0.09nm/mm and successfully resolves adjacent hydrogen isotope emission lines (HI: 121.567 nm and DI: 121.534 nm) using a 100 μm slit. With a temporal resolution of 1 μs, the LAB diagnostic is a powerful tool for investigating localized, small-scale, high-frequency plasma phenomena in tokamaks.