Bioremediation of mining soils using metal tolerant fungi is widely considered as a promising cost-effective and ecofriendly approach. This study assessed the copper removal efficiency and bioaccumulation ability of the indigenous species Aspergillus hiratsukae LF1 and Aspergillus terreus LF2 isolated from the soils of an abandoned copper mine in Oman. Nutrient medium containing five different Cu (II) levels (0 - control, 100, 200, 300 and 500 mg/L) was employed for assessing both parameters. The removal efficiency from nutrient medium (100-500 mg Cu per L) ranged from 57% to 21% for A. hiratsukae LF1, and from 69% to 24% for A. terreus LF2. A. hiratsukae LF1 and A. terreus LF2 accumulated a maximum of 4.63 and 5.95 mg Cu/g,espectively, at 500 mg/L of Cu (II) concentration. The compositional analysis of extracellular polymeric substances excreted by both species revealed a hormetic response by A. hiratsukae LF1 at 100 mg/L; whereas increasing media Cu levels induced carbohydrates production in A. terreus LF2. These results hint at the involvement of carbohydrates in the Cu-tolerance mechanism of the latter. Copper accumulation in both species was further demonstrated through scanning electron microscopy and energy dispersive spectrometry. In line with the pertaining literature, our results are somewhat inconclusive concerning whether proteins or carbohydrates play a more pivotal role in copper complexation in both species; yet, FTIR analysis showed the participation of different functional groups in Cu sorption. Overall, although additional research is required to advance the knowledge about both Aspergillus species, our findings suggest that A. terreus LF2 presents greater promise for copper bioremediation due to enhanced tolerance and accumulation capacity.
11 November 2016 in The Open Biotechnology Journal
The role and significance of microorganisms in environmental recycling activities marks geomicrobiology one of the essential branches within the environmental biotechnology field. Naturally occurring microbes also play geo-active roles in rocks, leading to biomineralization or biomobilization of minerals and metals. Heavy metals, such as chromium (Cr), are essential micronutrients at very low concentrations, but are very toxic at higher concentrations. Generally, heavy metals are leached to the environment through natural processes or anthropogenic activities such as industrial processes, leading to pollution with serious consequences. The presence of potentially toxic heavy metals, including Cr, in soils does not necessarily result in toxicity because not all forms of metals are toxic. Microbial interaction with Cr by different mechanisms leads to its oxidation or reduction, where its toxicity could be increased or decreased. Chromite contains both Cr(III) and Fe(II) and microbial utilization of Fe(II)- Fe(III) conversion or Cr (III) - Cr (VI) could lead to the break-down of this mineral. Therefore, the extraction of chromium from its mineral as Cr (III) form increases the possibility of its oxidation and conversion to the more toxic form (Cr (VI)), either biologically or geochemically. Cr (VI) is quite toxic to plants, animals and microbes, thus its levels in the environment need to be studied and controlled properly. Several bacterial and fungal isolates showed high tolerance and resistance to toxic Cr species and they also demonstrated transformation to less toxic form Cr (III), and precipitation. The current review highlights toxicity issues associated with Cr species and environmental friendly bioremediation mediated by microorganisms.
The Angudan Orogeny affected Cryogenian to earliest Cambrian sedimentary rock formations of the Jabal Akhdar Dome of the Oman Mountains. These rocks were folded and cleaved at 525 ± 5 Ma. We studied the Cambro-Ordovician (Terreneuvian to Darriwillian) Amdeh Formation of the neighboring Saih Hatat Dome to see whether this formation was also affected by the Angudan Orogeny. The Angudan deformation within the Jabal Akhdar Dome is known for its folds and cleavage. Due to age considerations (see above), we studied the folds and cleavages within the two oldest members of the Amdeh Formation (Am 1 and Am 2) in order to compare them with the ones that are known from the Jabal Akhdar Dome to possibly detect Angudan-related deformation in Am 1 and Am 2. Angudan folds of the Jabal Akhdar Dome display fold axes that are oriented NE/SW, but the two lowest members of the Amdeh Formation reveal one set of folds with subhorizontal fold axes that trend NW-NNW/SE-SSE. The lack of Angudan-related folds suggests that the lowest Amdeh Member (Am 1) postdates the Angudan Orogeny. The age of Am 1 is uncertain. Based on our structural results, we consider an upper Terreneuvian age (late stage 2) for Am 1. The folds in Am 1 and 2 are related to the Late Cretaceous–Cenozoic Semail Orogeny (term introduced here). The observed fold vergences (mainly to the W and SW) were caused by shear deformation during descent into the subduction zone by simple shear. The contact between the stratigraphically underlying Hiyam Formation and the Amdeh Formation is generally considered to be an unconformity. We observed a distinct NW/SE-striking deformation zone along the contact of both formations which is located in proximity to the largest observed fold. Tectonically, this contact is defined by the sinistral Wadi Amdeh Fault (name introduced here). The unconformity should be present in the subsurface of the southwestern fault block. Near the contact between the Hiyam and the Amdeh formations, a 20 cm thick unit of reddish cataclasite/tectonic breccia occurs within the basal part of Am 1 which represents a deformed acidic layer or sill. This rock unit could be the first evidence for Cambrian igneous activity.
This study presents a new approach for detection and mapping of ancient slag heaps using 16-band multispectral satellite imagery. Understanding the distribution of slag (a byproduct of metal production) is of great importance for understanding how metallurgy shaped long-term economic and political change across the ancient Near East. This study presents results of slag mapping in Oman using WorldView-3 (WV3) satellite imagery. A semi-automated target detection routine using a mixed tuned matched filtering (MTMF) algorithm with scene-derived spectral signatures was applied to 16-band WV3 imagery. Associated field mapping at two copper production sites indicates that WorldView-3 satellite data can differentiate slag and background materials with a relatively high (>90%) overall accuracy. Although this method shows promise for future initiatives to discover and map slag deposits, difficulties in dark object spectral differentiation and underestimation of total slag coverage substantially limit its use. Resulting lower estimations of combined user’s (61%) and producer’s (45%) accuracies contextualize these limitations for slag specific classification. Accordingly, we describe potential approaches to address these challenges in future studies. As sites of ancient metallurgy in Oman are often located in areas of modern exploration and mining, detection and mapping of ancient slag heaps via satellite imagery can be helpful for discovery and monitoring of vulnerable cultural heritage sites.
11 April 2022 in Journal of African Earth Sciences