Robotic devices for rehabilitation and training is a promising and challenging research topic with a potentially huge social impact. The availability of tools for autonomously performing physiotherapy exercises increases their efficiency, provides supplementary information about results and progress, reduces physiotherapists’ efforts and the need of their physical presence during exercise sessions, and encourages autonomy and independence in people with disabilities. Nevertheless, supportive technologies developed without the inputs and feedback of the end-user throughout the design process are less likely to be adopted for their intended purpose and use case. In this article, we propose a modular hand/wrist exoskeleton that actuates the wrist flexion/extension and adduction/abduction motions and hand fingers flexion/extension motions. It is designed to be wearable and easy to control and manage and can be used by the patient in collaboration with the physiotherapist or autonomously. A user-centered design perspective has been employed in all the design and development phases. This article introduces the main features of the device and presents some tests conducted with a user having limited hand and wrist mobility.
The Fin-Ray principle, inspired by the physiology of fish rays, represents the foundation of a large number of robotic devices. However, despite their popularity, there is not any ad-hoc theoretical model technique for the analysis of this family of fingers. This lack is the main motivation of the presented work, which provides the mathematical modeling, analysis, and prototyping of a closed-chain Fin-Ray finger. In this scenario, the contribution of this article is twofold. At one end, we provide a general discrete Cosserat approach for the modeling of closed-chain soft robots which shares the geometrical structure of the rigid robotics counterpart. On the other end, the approach is employed to explore the family of Fin-Ray effect fingers. Finally, an improved design, which is able to conform to contacting surfaces, while maintaining stiffness out of its grasping plane, is fabricated and its performances are compared to those of a previously proposed prototype.
11 June 2018 in IEEE Robotics and Automation Letters
In this study, we present an efficient mathematical representation of soft robotic fingers based on screw theory. Then, we show how the model and its main properties can be exploited in the design phase, and we present an application for an underactuated tendon-driven gripper with a modular structure, in which the joint stiffness values are defined to obtain the desired equivalent stiffness and kinematics manipulability at the fingertips. A distribution of stiffness through the flexible parts of the gripper is fundamental to characterize its overall behavior: The introduced mathematical model enables the gripper designer to analyze how a specific property, e.g., a desired trajectory of the fingertips, a desired overall stiffness, a distribution of contact force, etc., is influenced by the stiffness of its passive joints, and vice-versa evaluating the joint stiffness values allowing to get a desired properties. Joints with different stiffness values can be obtained by regulating three-dimensional-printing parameters and material properties in the manufacturing process. It is possible to design modular grippers with the same mechanical structure, but different behaviours, i.e., different fingertip trajectories, equivalent fingertip stiffness ellipsoids etc. Gripper modules can be easily assembled and disassembled, maintaining the same base, to adapt them to different tasks. The presented model and design guidelines are a first step in the direction of soft grippers that can be optimized for a specific problem.
Augmenting the human hand with robotic extra fingers is a cutting-edge research topic and has many potential applications, in particular as a compensatory and rehabilitation tool for patients with upper limb impairments. Devices composed of two extra fingers are preferred with respect to single finger devices when reliable grasps, resistance to external disturbances, and higher payloads are required. Underactuation and compliance are design choices that can reduce the device complexity and weight, maintaining the adaptability to different grasped objects. When only one motor is adopted to actuate multiple fingers, a differential mechanism is necessary to decouple finger movements and distribute forces. In this paper, the main features of a wearable device composed of two robotic extra fingers are described and analyzed in terms of kinematics, statics, and mechanical resistance. Each finger is composed of modular phalanges and is actuated with a single tendon. Interphalangeal joints include a passive elastic element that allows restoring the initial reference configuration when the tendon is released. The stiffness of each passive element can be customized in the manufacturing process and can be chosen according to a desired closure movement of the fingers. Another key aspect of the device is the differential system connecting the actuator to the fingers.
21 February 2020 in IEEE Robotics and Automation Letters
The aim of this paper is to introduce the concept of bilateral haptic cooperation as a novel paradigm for human-robot cooperative tasks. The approach is demonstrated with a system composed of a soft gripper and a wearable interface. The soft gripper, called CoGripper, has been design to guarantee a safe interaction giving the possibility to the operator to reconfigure the device according to the object to be grasped. The wearable interface is used to control the open/close motion of the gripper and to feedback information about important task parameters, e.g., the grasp tightness. The result is a bilateral haptic collaboration where human and robot bidirectionally communicate through the interface. The user interaction with the system results extremely intuitive and simple. We performed three user studies to prove the effectiveness of bilateral haptic collaboration involving ten subjects. Results confirmed that the use of the wearable interface reduces the time to accomplish a cooperative task and enable a better control of the grasp tightness.
11 August 2020 in IEEE Robotics and Automation Letters
This paper introduces Mag-Gripper, a novel robotic gripper specifically designed for autonomous clothing manipulation. It is capable of improving the grasp repeata- bility and precision, compensating uncertainties in the desired grasping locations. We propose to approach the autonomous clothing manipulation challenge by exploiting a suitable magnetic force. For this reason, Mag-Gripper is equipped with an electromagnet capable of exploiting the presence of small metal parts properly placed on the garment to be grasped. The electromagnet is not a novel component in the literature, but our design innovation consists in embedding the electromagnet in the structure of a jaw gripper. This type of end-effector, corresponding to the simplest representation of a hand capable of opposability, allows to produce easily controllable devices to perform grasps similar to the human pinch grasp. Mag-Gripper can find applications either in Research labs investigating Machine Learning-based clothing manipulation techniques either in in companies having to manage a large amount of returns, either in home setting scenarios.