8 July 2020 in Lab on a Chip
In recent years, microfluidic-based sample preparation techniques have emerged as a powerful tool for measurements at large scale X-ray facilities. Most often the microfluidic device was a form of hybrid system, i.e. an assembly of different materials, because a simple, versatile and inexpensive microfabrication method, on the one hand, and X-ray compatibility, on the other hand, cannot generally be achieved by the same material. The arrival of a new polymer family based on off-stoichiometric thiol-ene-epoxy (OSTE+) has recently redistributed the cards. In this context, we studied the relevance and the compatibility of OSTE+ for small-angle X-ray scattering (SAXS) studies. The material was characterized regarding its X-ray properties (transmission coefficient, attenuation coefficient, scattering pattern and polymer aging under X-ray light) and their comparison with those of the usual polymers used in microfluidics and/or for synchrotron radiation experiments. We show that OSTE+ has a better SAXS signal than polyimide, the polymer of reference in the SAXS community. Then a detailed protocol to manufacture a suitably thin full OSTE+ chip (total thickness <500 μm) is described and the potency of full OSTE+ devices for in situ SAXS studies is highlighted in two case-studies: the characterization of gold nanoparticles and the precipitation of cerium oxalate particles, both in moving droplets. Additionally, a method to analyze the scattering signals from droplet and carrier phase in a segmented flow is proposed.
30 January 2025 in Cement and Concrete Research
22 February 2019 in Langmuir
23 January 2026 in Journal of the American Ceramic Society
The hydration process of ordinary Portland cement (OPC) involves intricate interactions among ions in the pore solution, dissolving clinker phases, and precipitating hydrates. Tricalcium aluminate () shows the highest reactivity of the cement clinker phases during the initial hydration stages of OPC. The kinetic control of this reaction is of fundamental importance. In commercial OPC, cement producers add calcium sulfates to suppress the initial reactivity of . Dissolution suppression strongly depends on the chemical nature of the added anion. This study explores the early hydration behavior of in the presence of three sodium salts (NaCl, , and ) using in situ isothermal calorimetry and in situ X‐ray diffraction. Among the sodium salts studied, phosphate exhibits the strongest inhibition of early hydration, followed by sulfate and chloride. The experimental data are combined with two theoretical methods: thermodynamic modeling and molecular dynamics simulations. The molecular dynamics simulation implies the very fast formation of a hydroxyapatite‐like surface layer on the surface. It also yields the interfacial tensions of the salt‐containing systems, which corresponds to the experimentally observed order. Time‐dependent thermodynamic modeling of the hydrating systems provides insights into the equilibrium phase composition. This work can provide pathways for further studies bridging experimental in situ methods and theoretical approaches such as all‐atom molecular simulations and thermodynamic modeling.