14 August 2024 in IEEE Access
Aiming at the problems of excessive fluctuation and long adjustment time when LLC resonant converter encounters load mutation in traditional control strategy, which seriously affects the normal use, an improved self-disturbance control strategy based on sliding mode control is proposed. The mathematical modeling of LLC resonant converter is carried out by using the method of extended description function to obtain the transfer function of LLC resonant converter. On the basis of linear self-disturbance control, sliding mode control is introduced as the control rate. Through simulation, the steady-state characteristics and dynamic characteristics of LLC resonant converter under three different control strategies of PI (proportional integral controller), LADRC (linear active disturbance rejection control), and SM_ADRC (sliding mode active disturbance rejection control) are compared and analyzed. The simulation results show that the sliding mode active disturbance rejection control is superior to the other two control strategies in improving the response speed and anti-interference ability of LLC resonant converter, with a response time of only 2ms and a ripple of only 0.04V. A small power experimental platform with an output power of 192W is built. The experimental results show that LLC resonant converter can be restored to steady state in a short time by using sliding mode active disturbance rejection control, which effectively improves the dynamic characteristics of the system.
16 January 2026 in IEEE Transactions on Instrumentation and Measurement
The electromagnetic signals generated during the coal rock loading process are prone to interference from environmental noise, making direct analysis difficult. To effectively extract the electromagnetic radiation characteristics during the fracture process, this paper proposes a modal component optimization method based on the multi-strategy improved black-wing kite algorithm (IBKA), the smooth-peak feature fusion classification (SPMF), and combines wavelet adaptive threshold denoising and CEEMDAN decomposition to construct the IBKA-CEEMDAN-SPMF joint denoising framework. By superimposing the spindle-shaped oscillation wave-form and the trend term to construct the simulated signal, the performance of each stage of the algorithm was systematically simulated and verified through single-axis loading experiments. The results show that the improved IBKA increases the convergence speed of CEEMDAN decomposition by 15% and improves the accuracy by 8.3%; the SPMF classification method can achieve more stable and reliable signal reconstruction; compared with other methods, the signal-to-noise ratio is improved by 13 dB. IBKA-CEEMDAN-SPMF shows excellent denoising ability in both simulated and measured signals, and the noise ratio of the denoised signal is the lowest at 0.0928, with the maximum noise ratio reduction of 53.9% compared to other comparison methods. The research proves that this method can be embedded in the precursory recognition models of time-domain, frequency-domain and mixed signals, providing effective technical support for the multi-source information fusion of coal rock dynamic disaster monitoring.
5 November 2026 in Results in Engineering
25 July 2026 in SSRN Electronic Journal
To investigate the microcurrent characteristics and evolution law of loaded coal-rock during deformation and fracture, a stress-microcurrent coupling model for loaded coal-rock was proposed based on crack propagation and the charge generation mechanism. On this basis, a three-dimensional coal-rock model was established in COMSOL to conduct numerical simulations under different loading rates. The results show that the microcurrent is concentrated at the crack tips and on both sides of cracks in the coal seam, and is transmitted toward the coal seam surface as the cracks propagate. An increase in loading rate accelerates crack propagation, and the microcurrents inside the coal seam and on its surface exhibit synchronous enhancement in the same direction. Therefore, the surface microcurrent can be used as a characterization signal of internal damage evolution in coal-rock. Furthermore, uniaxial loading tests were conducted using a self-developed nA-level microcurrent acquisition instrument. The results indicate that the microcurrent signals of loaded coal-rock under different loading rates all exhibit staged evolution characteristics, and the microcurrent peaks appear 2s earlier than the stress peaks. As the loading rate increases, the microcurrent amplitude gradually increases, and a positive correlation is observed between microcurrent and loading stress. The correlation coefficients R2 between the experimental data and the coupling model all exceed 0.90, verifying the accuracy of the proposed coupling model. The findings can further improve the theoretical system of microcurrent in loaded coal-rock and provide theoretical support for the early warning of coal-rock dynamic disasters.
29 September 2026 in Results in Engineering