1 May 2009 in Journal of Geotechnical and Geoenvironmental Engineering
Scientific design of a railway track formation requires an understanding of the subgrade behavior and the factors affecting it. These include the effective resilient stiffness during train passage, which is likely to depend on the stress history and the stress state of the ground, and the stress path followed during loading. This study investigates the last of these, by means of a two-dimensional dynamic finite-element analysis. The effects of train speed, acceleration/braking, geometric variation in rail head level, and a single unsupported sleeper are considered. Results indicate that dynamic effects start to become apparent when the train speed is greater than 10% of the Rayleigh wave speed, vc , of the subgrade. At a train speed of 0.5 vc , the shear stresses will be underestimated by 30% in a static analysis, and at train speeds greater than vc the stresses due to dynamic effects increase dramatically. Train acceleration/braking may increase shear stresses and horizontal displacements in the soil, an...
1 November 2009 in Journal of Geotechnical and Geoenvironmental Engineering
The measurement of track stiffness, or track modulus, is an important parameter for assessing the condition of a railway track. This paper describes a method by which the dynamic track modulus can be determined from the dynamic displacements of the track during normal train service, measured using geophones. Two techniques are described for calculating the track modulus—the inferred displacement basin test (DBT) method and a modified beam on an elastic foundation (BOEF) method. Results indicate that the viscoelastic response of the soil will influence the value of track modulus determined using the DBT method. The BOEF method was therefore used to calculate the apparent increase in axle load due to train speed. Hanging or partly supported sleepers were associated with a relatively small increase in dynamic axle loads with train speed.
30 April 2018 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
Extreme weather causes substantial adverse socio-economic impacts by damaging and disrupting the infrastructure services that underpin modern society. Globally, $2.5tn a year is spent on infrastructure which is typically designed to last decades, over which period projected changes in the climate will modify infrastructure performance. A systems approach has been developed to assess risks across all infrastructure sectors to guide national policy making and adaptation investment. The method analyses diverse evidence of climate risks and adaptation actions, to assess the urgency and extent of adaptation required. Application to the UK shows that despite recent adaptation efforts, risks to infrastructure outweigh opportunities. Flooding is the greatest risk to all infrastructure sectors: even if the Paris Agreement to limit global warming to 2°C is achieved, the number of users reliant on electricity infrastructure at risk of flooding would double, while a 4°C rise could triple UK flood damage. Other risks are significant, for example 5% and 20% of river catchments would be unable to meet water demand with 2°C and 4°C global warming respectively. Increased interdependence between infrastructure systems, especially from energy and information and communication technology (ICT), are amplifying risks, but adaptation action is limited by lack of clear responsibilities. A programme to build national capability is urgently required to improve infrastructure risk assessment. This article is part of the theme issue ‘Advances in risk assessment for climate change adaptation policy’.
22 February 2014 in Acta Geotechnica
28 April 2021 in Acta Geotechnica
1 June 2024 in Journal of Geotechnical and Geoenvironmental Engineering
Building and ground settlement due to construction dewatering is a well-studied topic. However, most previous investigations have not considered the barrier effect of an adjacent undergroun...