12 December 2022 in Nature Communications
Ultrahigh-resolution patterning with high-throughput and high-fidelity is highly in demand for expanding the potential of organic light-emitting diodes (OLEDs) from mobile and TV displays into near-to-eye microdisplays. However, current patterning techniques so far suffer from low resolution, consecutive pattern for RGB pixelation, low pattern fidelity, and throughput issue. Here, we present a silicone engineered anisotropic lithography of the organic light-emitting semiconductor (OLES) that in-situ forms a non-volatile etch-blocking layer during reactive ion etching. This unique feature not only slows the etch rate but also enhances the anisotropy of etch direction, leading to gain delicate control in forming ultrahigh-density multicolor OLES patterns (up to 4500 pixels per inch) through photolithography. This patterning strategy inspired by silicon etching chemistry is expected to provide new insights into ultrahigh-density OLED microdisplays.
31 December 2024 in ACS Omega
We developed a two-transistor, zero-capacitor (2T0C) gain-cell memory featuring a self-aligned top-gate-structured thin-film transistor (TFT) for the first time. The proposed indium tin zinc oxide (ITZO) channel-incorporated architecture was specifically engineered to minimize parasitic capacitance for achieving long-retention 2T0C memory operations. A typical 2T0C structure features five types of parasitic capacitances; however, the proposed SATG design effectively used an essential gate insulator capacitance (C OX) and reduced four nonessential capacitances (C WBL-WWL, C WWL-SN, C RWL-SN, and C RBL-SN) to virtually zero. The ITZO-based 2T0C gain-cell memory achieved a retention time >10,000 s owing to the extremely low off-current (2.33 × 10-18 A/μm), superior positive-bias stability (0.71 V), and high saturation mobility [17.52 cm2/(V s)] of the optimized TFT structure. Our proposed memory with long retention and high endurance is a promising solution for next-generation 3D-integrated stacked dynamic random-access memories and defines a new structural standard for future memory architectures.
15 May 2023 in Applied Surface Science
16 July 2024 in ACS Applied Materials & Interfaces
28 June 2024 in Applied Surface Science
17 February 2026 in ACS Applied Electronic Materials