With the arrival of the era of big data, the conventional von Neumann architecture is now insufficient owing to its high latency and energy consumption that originate from its separated computing and memory units. Neuromorphic computing, which imitates biological neurons and processes data through parallel procedures between artificial neurons, is now regarded as a promising solution to address these restrictions. Therefore, a device with analog switching for weight update is required to implement neuromorphic computing. Resistive random access memory (RRAM) devices are one of the most promising candidates owing to their fast-switching speed and scalability. RRAM is a non-volatile memory device and operates via resistance changes in its insulating layer. Many RRAM devices exhibiting exceptional performance have been reported. However, these devices only excel in one property. Devices that exhibit excellent performance in all aspects have been rarely proposed. In this Research Update, we summarize five requirements for RRAM devices and discuss the enhancement methods for each aspect. Finally, we suggest directions for the advancement of neuromorphic electronics.
21 February 2022 in Journal of Materials Science & Technology
Recently, metal–organic frameworks (MOFs) have gained attention in the field of electronics owing to their capability to tune their electrical characteristics. However, conventional methods for synthesizing MOFs pose challenges for their integration into electronic devices because of their long synthesis times and complex transfer steps. In this study, for the first time, lasing‐assisted synthesis (LAS) is used to rapidly and directly synthesize MOFs. These are applied to resistive random access memory (RRAM) devices. Using the LAS method, Cu(BDC) and Cu(BTC) are synthesized in a remarkably short time (≈5 min) and formed directly on metal substrates as thin films. This simplified their integration into RRAMs. The Cu(BDC)‐ and Cu(BTC)‐based RRAMs are evaluated for their potential in memory and neuromorphic applications. Both devices demonstrated nonvolatile memory capabilities with a remarkable data retention time of 104 s and long‐term plasticity (LTP) in response to voltage stimuli. However, the suitability of each device for a specific application varies depending on the type of MOFs used. The Cu(BTC)‐based RRAM is more suitable for memory applications because of its higher on/off ratio, longer endurance, and more data storage capacity. Conversely, Cu(BDC)‐based RRAM is highly effective in neural network simulation, achieving higher classification accuracy.
16 July 2024 in ACS Applied Materials & Interfaces
This research demonstrates a method to reduce the resistance of amorphous indium–gallium–zinc–oxide (a-IGZO) using a “vacuum-free solution-based metallization” (VSM) process, which revolutionizes the metallization process thanks to its simplicity, by simply dipping the a-IGZO into trimethyl aluminium (TMA, (CH3)3Al) solution. From the XPS results, it was found that oxygen vacancies were generated after the VSM process, resulting in the enhanced conductivity. Various metallization time and solution temperature conditions were investigated, and the measured conductivity of the a-IGZO could be enhanced up to 20.32 S cm−1, which is over 105 times larger compared to that of the untreated a-IGZO. By utilizing the VSM process, self-aligned top-gate (SATG) a-IGZO thin-film-transistors (TFTs) were successfully fabricated, and to provide an explanation for the mechanism, X-ray photoelectron spectroscopy (XPS) was employed.