Friction stir welding is a solid state welding process which involves joining similar or dissimilar metals using a rotating tool. Tool geometry and traverse speed and rotating speed of motion of the tool, tool axial force and tilt angle are some of the variables in this process. Many materials like Aluminium alloy 2000, 6000 and 7000 series have been joined using this technique. Mechanical characterization, similar and dissimilar combinations, micro structural characterization and the Influences of tool pin profiles for FSW processes are some of the important areas of research. This paper reviews the work done in the above mentioned areas and concludes by suggesting further scope for research in friction stir welding.
Aluminum and its alloys have been used extensively due to their light weight, moderate strength and good corrosion resistance. Aluminium alloy 7075 has been researched upon especially as a potential candidate for aircraft material. This alloy is difficult to weld using conventional welding techniques like GMAW and GTAW. An attempt has been made in this investigation to weld 7075 alloy using GTAW and GMAW with argon as a shielding gas. Mechanical properties of the joint like tensile strength, Hardness and impact strength have been tested and reported. Microstructural characterization has been done using standard metallography. SEM micrographs have also been taken to study the fracture characteristics.