A hybrid frequency selective rasorber is presented in this paper based on hybrid lossy layers. The hybrid lossy layers is composed of an Absorption-Transmission(A-T) layer and a Transmission-Absorption(T-A) layer, which are responsible for the absorption performance in the low and high frequency respectively. The A-T layer is composed of a lumped-resistors loaded cross-frame structure(CFS), which connects four parallel inductor and capacitor resonators. The T-A layer is constructed by a parallel plate capacitor loaded square loop resonator connecting four lumped-resistor loaded T-shaped metal branches. The FSS layer is composed of metal square slot. The hybrid FSR provides a transmission window around 10GHz and two-sided absorption bands in 3.19GHz-9GHz and 11.85GHz-21.18GHz, meanwhile the wideband reflection suppression(S 11 <-10dB) is achieved from 3.2 to 21.18GHz (147%). An assembled prototype is measured to verify the simulated results.
A frequency selective rasorber (FSR) with fast roll-off and wide absorption/transmission band is introduced in this article, working as a band-pass filter from 1.7 to 3.1 GHz, while working as an absorber from 5.72 to 17 GHz. The proposed FSR is designed by the lossy layer at the top and the band-pass frequency selective surface (FSS) at the bottom. The lossy layer is constructed by two parts including a square loop and a series RLC structures to provide a wide absorption band. The band-pass FSS is a three-tier structure including two patch layers and one meander line layer in the middle. This multilayer FSS is used to generate a transmission window in S band and a wide reflection band in the high frequency. The working mechanism of the FSR is explained by the equivalent circuit model. Finally, the fabricated prototype and the measurement results are presented to verify the design of the FSR.