29 August 2024 in IEEE Wireless Communications Letters
In this letter, we investigate the channel estimation problem for MIMO wireless communication systems with movable antennas (MAs) at both the transmitter (Tx) and receiver (Rx). To achieve high channel estimation accuracy with low pilot training overhead, we propose a tensor decomposition-based method for estimating the parameters of multi-path channel components, including their azimuth and elevation angles, as well as complex gain coefficients, thereby reconstructing the wireless channel between any pair of Tx and Rx MA positions in the Tx and Rx regions. First, we introduce a two-stage Tx-Rx successive antenna movement pattern for pilot training, such that the received pilot signals in both stages can be expressed as a third-order tensor. Then, we obtain the factor matrices of the tensor via the canonical polyadic decomposition, and thereby estimate the angle/gain parameters for enabling the channel reconstruction between arbitrary Tx/Rx MA positions. In addition, we analyze the uniqueness condition of the tensor decomposition, which ensures the complete channel reconstruction between the whole Tx and Rx regions based on the channel measurements at only a finite number of Tx/Rx MA positions. Finally, simulation results are presented to evaluate the proposed tensor decomposition-based method as compared to existing methods, in terms of channel estimation accuracy and pilot overhead.
10 July 2018 in IEEE Transactions on Communications
Communication at millimeter wave frequencies will be one of the essential new technologies in 5G. Acquiring an accurate channel estimate is the key to facilitate advanced millimeter wave hybrid multiple-input multiple-output (MIMO) precoding techniques. Millimeter wave MIMO channel estimation, however, suffers from a considerably increased channel use overhead. This happens due to the limited number of radio frequency (RF) chains that prevent the digital baseband from directly accessing the signal at each antenna. To address this issue, recent research has focused on adaptive closed-loop and two-way channel estimation techniques. In this paper, unlike the prior approaches, we study a non-adaptive, hence rather simple, open-loop millimeter wave MIMO channel estimation technique. We present a random phase rotation design of channel subspace sampling signals and show that they obey the restricted isometry property (RIP) with high probability. We then formulate the channel estimation as a low-rank subspace decomposition problem and, based on the RIP, show that the proposed framework reveals resilience to a low signal-to-noise ratio. It is revealed that the required number of channel uses ensuring a bounded estimation error is linearly proportional to the degrees of freedom of the channel, whereas it converges to a constant value if the number of RF chains can grow proportionally to the channel dimension while keeping the channel rank fixed. In particular, we show that the tighter the RIP characterization the lower the channel estimation error is. We also devise an iterative technique that effectively finds a suboptimal, but stationary, solution to the formulated problem. The proposed technique is shown to have improved channel estimation accuracy with a substantially low channel use overhead as compared to that of previous closed-loop and two-way adaptation techniques.
20 April 2022 in IEEE Transactions on Communications
The fact that the millimeter-wave (mmWave) multiple-input multiple-output (MIMO) channel has sparse support in the spatial domain has motivated recent compressed sensing (CS)-based mmWave channel estimation methods, where the angles of arrivals (AoAs) and angles of departures (AoDs) are quantized using angle dictionary matrices. However, the existing CS-based methods usually obtain the estimation result through one-stage channel sounding that have two limitations: (i) the requirement of large-dimensional dictionary and (ii) unresolvable quantization error. These two drawbacks are irreconcilable; improvement of the one implies deterioration of the other. To address these challenges, we propose, in this paper, a two-stage method to estimate the AoAs and AoDs of mmWave channels. In the proposed method, the channel estimation task is divided into two stages, Stage I and Stage II. Specifically, in Stage I, the AoAs are estimated by solving a multiple measurement vectors (MMV) problem. In Stage II, based on the estimated AoAs, the receive sounders are designed to estimate AoDs. The dimension of the angle dictionary in each stage can be reduced, which in turn reduces the computational complexity substantially. We then analyze the successful recovery probability (SRP) of the proposed method, revealing the superiority of the proposed framework over the existing one-stage CS-based methods. We further enhance the reconstruction performance by performing resource allocation between the two stages. We also overcome the unresolvable quantization error issue present in the prior techniques by applying the atomic norm minimization method to each stage of the proposed two-stage approach. The simulation results illustrate the substantially improved performance with low complexity of the proposed two-stage method.
25 August 2021 in IEEE Wireless Communications Letters
A reconfigurable intelligent surface (RIS) consists of massive meta elements, which can improve the performance of future wireless communication systems. Existing RIS-aided channel estimation methods try to estimate the cascaded channel directly, incurring high computational and training overhead especially when the number of elements of RIS is extremely large. In this letter, we propose a cost-efficient channel estimation method via rank-one matrix factorization (MF). Specifically, if the RIS is employed near base station (BS), it is found that the RIS-aided channel can be factorized into a product of low-dimensional matrices. To estimate these factorized matrices, we propose alternating minimization and gradient descent approaches to obtain the near optimal solutions. Compared to directly estimating the cascaded channel, the proposed MF method reduces training overhead substantially. Finally, the numerical simulations show the effectiveness of the proposed MF method.
18 April 2023 in IEEE Transactions on Wireless Communications
A reconfigurable intelligent surface (RIS) allows a reflection transmission path between a base station (BS) and user equipment (UE). In wireless localization, this reflection path aids in positioning accuracy, especially when the line-of-sight (LOS) path is subject to severe blockage and fading. In this paper, we develop a RIS-aided positioning framework to locate a UE in environments where the LOS path may or may not be available. We first estimate the RIS-aided channel parameters from the received signals at the UE. To infer the UE position and clock bias from the estimated channel parameters, we propose a fusion method consisting of weighted least squares over the estimates of the LOS and reflection paths. We show that this approximates the maximum likelihood estimator under the large-sample regime and when the estimates from different paths are independent. We then optimize the RIS phase shifts to improve the positioning accuracy and extend the proposed approach to the case with multiple BSs and UEs. We derive Cramér–Rao bound (CRB) and demonstrate numerically that our proposed positioning method approaches the CRB.
18 March 2025 in Neurocomputing