17 July 2014 in IEEE Wireless Communications Letters
The joint relay selection and related subchannel and power allocation problem is investigated for relay-aided device-to-device (D2D) communications underlying cellular networks. We show the optimal power allocation problem can be solved in a closed-form. Considering that the associated relay selection and subchannel assignment problem is NP-complete, we devise an iterative technique, the iterative Hungarian method (IHM). Interestingly, numerical results show that the proposed technique can offer near-optimal performance with polynomial complexity.
26 May 2022 in IEEE Transactions on Wireless Communications
Recently, the intelligent omni-surface (IOS) has been proposed as a novel instance of metasurface to achieve full-dimensional communications by jointly engineering its reflective and refractive properties. However, optimal beamforming scheme for the IOS is hard to obtain due to the difficulty in acquiring perfect channel state information (CSI). To address this issue, in this paper, we consider an IOS aided system where the beamforming scheme is designed via beam training with codebooks at the base station (BS), the IOS, and users. Given that the refractive/reflective signals are closely related to both incident signals from the BS and phase shifts of IOS elements, the codebooks at the BS and the IOS are designed jointly. Based on the joint BS-IOS codebook, a multi-lobe beam training mechanism is proposed to perform beam training for multiple users simultaneously, thereby reducing the training overhead. The training/feedback overhead of the proposed beam training and the impact of the codebook size are then analyzed theoretically. Simulation results indicate that the proposed scheme achieves a higher sum rate than the state-of-the-art beam training schemes and performs close to the perfect CSI case.
17 October 2022 in IEEE Transactions on Wireless Communications
Wireless simultaneous localization and mapping (SLAM) has attracted much attention as a promising technique to empower location based services. However, the accuracy of traditional wireless SLAM systems is limited as the wireless signals are easily disturbed by the uncontrollable radio environments. To mitigate this issue, in this paper, we propose a MetaSLAM system where multiple reconfigurable intelligent surfaces (RISs) are deployed to customize the wireless environments. To be specific, through adjusting the phase shifts of these RISs, the strength of reflected signals can be enhanced in order to resist the variance of radio environments. However, it is challenging to coordinate multiple RISs and optimize their phase shifts especially when their locations are unknown to the agent. In order to address these challenges, we formulate a MetaSLAM optimization problem, and design a two-stage optimization algorithm based on the genetic and particle filter algorithms to solve the formulated problem. Analysis of the complexity and the positioning error bound of the proposed SLAM system are provided. Simulation results show that compared with the benchmark schemes, the positioning error obtained by the MetaSLAM system is reduced by at least 31%.
20 April 2022 in IEEE Transactions on Communications
The fact that the millimeter-wave (mmWave) multiple-input multiple-output (MIMO) channel has sparse support in the spatial domain has motivated recent compressed sensing (CS)-based mmWave channel estimation methods, where the angles of arrivals (AoAs) and angles of departures (AoDs) are quantized using angle dictionary matrices. However, the existing CS-based methods usually obtain the estimation result through one-stage channel sounding that have two limitations: (i) the requirement of large-dimensional dictionary and (ii) unresolvable quantization error. These two drawbacks are irreconcilable; improvement of the one implies deterioration of the other. To address these challenges, we propose, in this paper, a two-stage method to estimate the AoAs and AoDs of mmWave channels. In the proposed method, the channel estimation task is divided into two stages, Stage I and Stage II. Specifically, in Stage I, the AoAs are estimated by solving a multiple measurement vectors (MMV) problem. In Stage II, based on the estimated AoAs, the receive sounders are designed to estimate AoDs. The dimension of the angle dictionary in each stage can be reduced, which in turn reduces the computational complexity substantially. We then analyze the successful recovery probability (SRP) of the proposed method, revealing the superiority of the proposed framework over the existing one-stage CS-based methods. We further enhance the reconstruction performance by performing resource allocation between the two stages. We also overcome the unresolvable quantization error issue present in the prior techniques by applying the atomic norm minimization method to each stage of the proposed two-stage approach. The simulation results illustrate the substantially improved performance with low complexity of the proposed two-stage method.
8 April 2022 in IEEE Transactions on Wireless Communications
The accelerated convergence of digital and real-world lifestyles has imposed unprecedented demands on today’s wireless network architectures, as it is highly desirable for such architectures to support wireless devices everywhere with high capacity and minimal signaling overhead. Conventional architectures, such as cellular architectures, are not able to satisfy these requirements simultaneously, and are thus no longer suitable for the future era. In this paper, we propose a capacity-centric (C2) architecture for future wireless networking. It is designed based on the principles of maximizing the number of non-overlapping clusters with the average cluster capacity guaranteed to be higher than a certain threshold, and thus provides a flexible way to balance the capacity requirement against the signaling overhead. Our analytical results reveal that C2 has superior generality, wherein both the cellular and the fully coordinated architectures can be viewed as its extreme cases. Simulation results show that the average capacity of C2 is at least three times higher compared to that of the cellular architecture. More importantly, different from the widely adopted conventional wisdom that base-station distributions dominate architecture designs, we find that the C2 architecture is not over-reliant on base-station distributions, and instead the user-side information plays a vital role and cannot be ignored.
15 October 2019 in IEEE Access