5 May 2021 in IEEE Transactions on Electron Devices
An investigation of a super klystron-like relativistic backward wave oscillator is presented in this article. To obtain high power and high efficiency, an additional anode cavity is used to promote electron-beam modulation. Additionally, two waveguide cavities at the end of the electron collector are employed to enhance the constructive resonance, which intensifies energy conversion from the modulated electron beam to the electromagnetic field. Because of the enhancement of centralized transition radiation, the power generated in the extractor constitutes over 95% of the total power. Consistent with the results from numerical simulations, microwaves with a power of 5.0 GW, a frequency of 4.4 GHz, and a pulsewidth of 36 ns were obtained in high-power microwave generation experiments with an external magnetic field of 0.42 T, in which the diode voltage and beam current were configured to be 815 kV and 15.5 kA, respectively, indicating a beam-wave conversion efficiency of 40%. The diode insulation was investigated experimentally, and an unfortunate shunting current of over 3 kA was observed when the working voltage was beyond 800 kV, which indicates an actual conversion efficiency of 33% in the diode region.
7 September 2023 in IEEE Transactions on Electron Devices
An investigation on the phase locking of S-band relativistic magnetrons with an all-cavity-extraction (ACE-RM) structure is carried out. In order not to disrupt the periodic distribution of electric fields in the resonant cavities, an azimuth-uniform coupling structure is introduced, which could achieve a transmission efficiency of over 98% at the operating frequency, with an amplitude difference of only ±3.3%. Furthermore, particle-in-cell (PIC) simulations demonstrate that when five ACE RMs are interconnected through four such coupling structures, phase locking can be achieved, and the relative phase jitters are controlled within ±1%. After establishing stable $\pi $ -mode oscillation in RMs, in each of the 20 ports, an average output power of over 400 MW can be obtained, corresponding to a total power of 8.5 GW and a power conversion efficiency of 45%.
30 March 2021 in IEEE Transactions on Electron Devices
An L-band all cavity axial extraction (ACAE) relativistic magnetron (RM) with a split cathode is proposed. The proposed RM is driven by virtual cathode that formed by axial flow of electrons from two conical emitters at both sides of slow wave structure, which is different from other RM that powered by radial flow of electrons from a cathode inside the interaction region. This cathode structure is simple but practical to generate a squeeze state electron in an RM with almost all the output structure. To improve the output performance, the anode blocks are modified with additional sections at both ends. Particle-in-cell (PIC) simulation results illustrate that when this tube is applied with a diode voltage of 600 kV, an average output microwave power of 1.6 GW can be obtained. Comparing with ACAE-RM using a conventional transparent cathode, the power conversion efficiency is improved from 47% to 67%.
6 December 2022 in IEEE Transactions on Electron Devices
A compact relativistic magnetron with diffraction output (MDO) of TEM mode has been investigated experimentally by using the EPA-90 high-voltage electron accelerator. The purpose is to verify the diffraction output in low-order mode predicted by numerical simulations. The diagnostic results have indicated that the MDO with all cavity extraction realizes the TEM mode output. When the diode voltage is 480 kV and the axial magnetic field is 0.49 T, the MDO could generate a microwave at a frequency of 2.42 GHz, corresponding to 950-MW output power and 25.8% conversion efficiency. This work paths a way for MDO to realize the radiation with low-order mode.
1 April 2021 in IEEE Transactions on Electron Devices
A high output power and high-efficiency ${L}$ -band inverted relativistic magnetron (IRM) driven by a virtual cathode (VC) is proposed. By switching the configuration of cathode and anode, a greater magnitude of current could be generated from an external annular emission surface. In order to excite the desired mode more efficiently and enhance the mode stability, the emitting region is divided into eight azimuthally periodic parts. The prolonged VC is formed in the interaction region by dc electric field directly. The particle-in-cell (PIC) simulation demonstrates that the proposed IRM could generate an output a TM 01 mode with a microwave power of 1.97 GW for a diode voltage of 600 kV and a uniform guiding magnetic field of 0.18 T. Comparing with IRM with an emission surface inside the interaction region, the power conversion efficiency is improved from 18% to 86%.
31 January 2022 in IEEE Transactions on Electron Devices
A preliminary investigation on S-band multiport relativistic magnetron (RM) is carried out, which is targeted at the application of high-power microwave (HPM) phased array system. For such system, the phase synchronization and stabilization of sources are crucial. In the proposed multiport RM, the HPMs in four independent output ports are extracted from the same resonant system, thus having the same amplitude and phase naturally. Moreover, the output mode of such multiport RM is fundamental mode, which can achieve Gaussian radiation in the far field directly. Since mode convertors and phase-locked units are no longer necessary, it is beneficial to the miniaturization of HPM phased array system. To further control the phase of output signals, a wide side dimension adjustable phase shifter used for this multiport RM is designed, which could achieve 180° phase shift with a power handling capacity of 568 MW. Particle-in-cell (PIC) simulation of such multiport RM combined with phase shifters applied a diode voltage of 450 kV is carried out. When all output signals are adjusted to be in- phase, an average output power of 265 MW in each port can be obtained, corresponding to a power conversion efficiency up to 65%, and the relative phase differences are controlled within ±2.4%.