4 December 2017 in IEEE Antennas and Wireless Propagation Letters
A compact Ka-band monopulse Cassegrain antenna based on the reflectarray elements is presented in this letter. The proposed antenna consists of a main-reflectarray, a sub-reflectarray, a SIW comparator and a monopulse feed to achieve good sum-difference characteristics. Compared with traditional monopulse Cassegrain antenna, the total length of the proposed antenna is shrinked to 67.85%. The results of measurement agree with that of simulation very well. The measured SUM beam gain of the proposed antenna is 29.4 dBi by eliminating the loss of Ka-band comparator, the 3-dB beamwidth is 3.85°, the first sidelobe level is under -12 dB, the cross-polarization level is better than -20 dB, and the gain ratios between the SUM and DIFF are about 3 dB and 5 dB in azimuth and elevation plane, respectively. The measured results show that the proposed antenna is a good candidate for the low-cost multi-mode tracking system with limited space, especially for that working at high frequency.
17 February 2015 in Journal of Electromagnetic Waves and Applications
A major failure mode of positive-intrinsic-negative (PIN) diode limiter is the diode junction thermal burnout due to the high-power microwave (HPM) irradiation. Based on the time domain circuit approach, an electro-thermal coupled model including junction transient self-heating effects is presented via analogous between thermal dynamic and electronic circuit topology. Moreover, the proposed model takes into account feedback updating of physical parameters as device junction temperature varying. The diode junction thermal behavior is simulated and verified by the device manufacture measurements. The PIN limiter circuit numerical results of the microwave pulse width dependence on power level under HPM interference validate the well-known semi-empirical Wunsch–Bell relationship. And the turning point value of microwave pulse width obtained in simulations is very close to that specified in Wunsch–Bell formula.
26 April 2022 in IEEE Microwave and Wireless Components Letters
An improved ferrite nonlinear (NL) loss theory is developed for polycrystal ferrite microstrip limiters upon the high-power microwave (HPM) environment. The NL critical threshold equation and equivalent loss model are derived from the field coupling mechanism between spin waves and microwave pulse. Thus, the equivalent NL loss behavior with the microwave waveform parameters (pulse duration and power) is implanted in the ferrite limiter model to perform the numerical simulation through the commercial electromagnetic tool. The measured limiting data at pulse duration with 60, 80, 100, and 200 ns are in good agreement with the equivalent simulation results.
5 January 2024 in IEEE Transactions on Microwave Theory and Techniques
Based on the linear responses and nonlinear (NL) loss effects of ferrite, a filtering–limiting (FT) integrated device applicable to the high-power microwave (HPM) electromagnetic environment is proposed. The small-signal bandpass filtering characteristics of the FT device with polycrystalline yttrium iron garnet (YIG) as a substrate are achieved using the conventional parallel-coupled microstrip structure. When HPM pulses within the operating frequency band are injected, the NL loss effects are excited in this device, achieving power-limiting characteristics. However, the spatial distribution of the RF magnetic fields in such a device is extremely inhomogeneous. There is currently no commercially available simulation tool that can effectively calculate the power loss performance of ferrite materials in the HPM electromagnetic environment. Therefore, combined with the transient-state NL threshold theory, an equivalent iterative simulation method for structure partition is proposed. This method is utilized to quantitatively evaluate the power loss of such resonant structures. The simulated results align well with the measured trends and can successfully indicate the limiting threshold, limiting isolation, and dynamic range of the FT device under HPM conditions.
7 September 2023 in IEEE Transactions on Electron Devices
An investigation on the phase locking of S-band relativistic magnetrons with an all-cavity-extraction (ACE-RM) structure is carried out. In order not to disrupt the periodic distribution of electric fields in the resonant cavities, an azimuth-uniform coupling structure is introduced, which could achieve a transmission efficiency of over 98% at the operating frequency, with an amplitude difference of only ±3.3%. Furthermore, particle-in-cell (PIC) simulations demonstrate that when five ACE RMs are interconnected through four such coupling structures, phase locking can be achieved, and the relative phase jitters are controlled within ±1%. After establishing stable $\pi $ -mode oscillation in RMs, in each of the 20 ports, an average output power of over 400 MW can be obtained, corresponding to a total power of 8.5 GW and a power conversion efficiency of 45%.
20 July 2023 in IEEE Transactions on Electron Devices
An $\textit{X}$ -band superradiant relativistic backward-wave oscillator (RBWO) operating at a low magnetic field with power conversion efficiency exceeding unity is proposed. The device efficiency is improved from two aspects: beam transmission stability focused by a low guiding magnetic field and microwave transmission efficiency. First, a gradually decaying axial magnetic field is applied. It could not only suppress the initial radial oscillation amplitude of the electron beam envelope but also transform the high transverse momentum of electrons into the axial momentum, which is beneficial to the beam–wave interaction Second, a novel structure with a front extractor is introduced. The backward wave is extracted into a coaxial channel outside the slow wave structure (SWS) and transmitted in TEM mode to avoid the power loss of the reflected microwave in the SWS caused by the dispersion effects. Particle-in-cell (PIC) simulation results reveal that when the intense relativistic electron beam (IREB) propagating in a 36-period superradiance-RBWO (SR-RBWO) is confined with a magnetic induction intensity that decreases from 0.81 T in cathode region to 0.43 T in interaction region, the output power of 1.04 GW corresponding to conversion factor $\textit{K}$ $=$ 1.55 can be obtained. The merits of low-magnetic-field operation and high efficiency make this tube a promising device used for the miniaturization of high-power SR systems.