We report the thermally driven giant field-like spin-torque in magnetic tunnel junctions (MTJ) on application of heat current from top to bottom. The field-like term is detected by the shift of the magneto-resistance hysteresis loop applying temperature gradient. We observed that the field-like term depends on the magnetic symmetry of the MTJ. In asymmetric structures, with different ferromagnetic materials for free and fixed layers, the field-like term is greatly enhanced. Our results show that a pure spin current density of the order of 109 A/m2 can be produced by creating a 120 mK temperature difference across 0.9 nm thick MgO tunnelling barrier. Our results will be useful for writing MTJ and domain wall-based memories using thermally driven spin torque.
We propose and demonstrate an experimental method to evaluate spin-transfer-torque (STT) efficiency in current-perpendicular-to-plane giant magnetoresistance devices, which utilizes STT-induced magnetization reversal against a perpendicular magnetic field. Using this method, we estimated the STT efficiency of FeCr with negative spin polarization, which attracts attention in spintronics applications. In comparison with NiFe with positive spin polarization, the sign of the STT induced by FeCr was opposite, reflecting the negative spin polarization. The STT efficiency of FeCr was approximately half that of NiFe at room temperature and surpassed that of NiFe at 50 K.
16 May 2022 in Journal of Magnetism and Magnetic Materials
Spin torque oscillators (STOs) that generate a persistent magnetization oscillation by spin-transfer torque are promising spintronic devices for various applications. In this study, we propose and experimentally demonstrate a method to characterize the magnetization dynamics of STOs using injection locking. By placing the STO near an antenna that generates a microwave magnetic field of a variable frequency ( ), injection locking of the STO to the microwave field occurs when is in the locking range around the intrinsic oscillation frequency. During injection locking, the dc resistance of the STO exhibits a peak-and-valley dependence on , which originates from the modification of the magnetization trajectory induced by injection locking. Based on this principle, the oscillation frequency can be estimated by measuring the dc resistance change. Because this method does not require measuring the high-frequency magnetoresistance signal from the STO, which is used in the conventional method, it is advantageous in cases where the high-frequency magnetoresistance signal is undetectable or exhibits additional frequency components different from the oscillation frequency.
We experimentally study the magnetization dynamics of an all-in-plane spin-torque oscillator (AIP-STO) by using injection locking to an external microwave magnetic field. The AIP-STO exhibits multiple frequency signals corresponding not only to the oscillation frequencies of the magnetic layers but also to the difference between these frequencies. The oscillation frequency is identified based on the principle that injection locking occurs only to the signal corresponding to the magnetization oscillation. We also analyze the magnetization dynamics during injection locking by micromagnetic simulations. The results demonstrate that injection locking is a powerful tool for elucidating the oscillation of the AIP-STO.
We have investigated the transport properties of electrically and thermally excited spin currents in a lateral spin valve consisting of a spin injector and detector with a middle ferromagnetic wire by detecting the first- and second-harmonic voltages. The first-harmonic spin signal was significantly suppressed by the middle ferromagnetic wire because of the spin absorption effect. On the other hand, in the second-harmonic signal, a small signal related to the middle ferromagnetic wire was observed in addition to a conventional spin signal with a reduced magnitude. This indicates that the additional ferromagnetic wire acts not only as the spin absorber but also as another spin injector under thermal spin injection, because the heat current caused by direct spin injection propagates to the middle ferromagnetic wire and creates another temperature gradient. By using this effect, we show that the magnetization direction of a ferromagnetic nanodot embedded in a nonmagnetic Cu wire becomes measurable.