23 March 2012 in Technical Physics
A pulsed action of an electron beam on a Zr-1% Nb zirconium alloy is studied. Alloy samples are irradiated by three 50-μs pulses at an energy density of 15–25 J/cm2, a power of (3–6) × 104 W/cm2, a current density of 10–50 A/cm2, and an electron energy of 18 keV. This method of processing is found to modify the surface layer of the alloy without changing the structure-phase state of its volume. This surface modification increases the hydrogen saturation resistance of the alloy.
19 August 2020 in IEEE Transactions on Instrumentation and Measurement
In this article, multifrequency eddy current testing is proposed to detect hydrogen concentration in alloy titanium. The effect of hydrogen on the titanium alloy was explored across the surface layer of the material. The sample has a fixed surface area, and the samples with the same thickness and different hydrogen concentrations are analyzed. Output voltage amplitudes and dielectric loss tangent in hydrogen-filled titanium VT1-0 were studied in the range of hydrogen concentration from 0.019 to 0.290 wt.% using the instrument Micromagnetic Multiparameter Microstructure and Stress Analysis (3MA-II) at the frequency from 200 to 1000 kHz. This article proposes a method of analyzing the internal conductivity of metals by eliminating surface effects. The linear relationship between hydrogen concentration and conductivity is obtained, and the experimental results that are closer to the theory than the four-probe method and the inclusion surface are obtained. The results show that the output signal amplitudes decreased with an increase of the hydrogen concentration and frequency, and in addition, the dielectric loss tangent obtains a similar result at the hydrogen concentra- tion >0.100 wt.%. It is shown that this method can be used to evaluate the concentration of hydrogen in metal.
30 December 2011 in Journal of Engineering Thermophysics
1 May 2021 in Russian Journal of Nondestructive Testing
Automation is a topical issue in the development of methods and equipment for ultrasonic nondestructive testing. The conditions of modern industrial production require the development of ultrasonic testing equipment that would be sufficiently flexible for a wide and changing range of manufactured products, which, as a rule, have a complex shape. This paper proposes a technology for ultrasonic flaw detection of complex shaped objects. Within the framework of this technology, it is proposed to use six-axis robotic manipulators to ensure the required angle of input of ultrasonic waves into the test object at each measuring position. The correct trajectory of robot’s movement during scanning is ensured by reconstructing the surface profile of the test object using optical profilometry and determining the location of the test object relative to the robotic manipulator using an electric probe. The effectiveness of the developed technology is verified experimentally within the framework of this work.
28 September 2016 in Instruments and Experimental Techniques