Urban land-cover change is increasing dramatically in most emerging countries. In Iraq and in the capital city (Baghdad). Active socioeconomic progress and political stability have pushed the urban border into the countryside at the cost of natural ecosystems at ever- growing rates. Widely used...
28 February 2023 in Eastern-European Journal of Enterprise Technologies
In this investigation, a kenaf/PLA composite specimen was subjected to the fatigue load, and the results were analyzed numerically. Some of the most significant fatigue tool aspects that were looked into were life expectancy, damage, alternative stress, and biaxiality indication. The static structural tool was utilized in order to predict the numerical analysis, and the calculations were performed with the GoodMan theory of fatigue. The loading was completely reversed so that it was equal to 30 kN. When it was discovered that the system could continue to function even after 1e6 cycles had been completed. After applying the alternative load of 30 kN, the biaxiality indication was found to be 0.425, with a minimum value of 0.9. It has been determined how much damage has occurred. The minimum amount of cycles necessary to reach the maximum damage potential is 1000, while the maximum amount of cycles necessary to reach the maximum damage potential is 1.7662·106. It has been established that there is another stress that is comparable to this one. Based on the findings of the investigation, it was determined that the fillet regions of the specimen were subjected to a maximum alternative stress of 716.4 MPa. The alternative stress cannot drop below 31.276 MPa under any circumstances. It has been determined that 106cycles have been spent living in total by the calculation. It has been found out that there is not going to be any damage regardless of the number of cycles that pass due to the fact that that number is 1. It was found that the alternative stress could reach a maximum value of 716.4 MPa, so that was the value that was used for the alternative stress
28 June 2026 in NTU Journal of Engineering and Technology
This paper involves object-based landslide detection, classification and susceptibility mapping with a specific focus on how Python scripting can complement automation, reproducibility and efficiency of analysis. A combined Geographic Object-Based Image Analysis (GEOBIA) and Python based Analytical Hierarchy Process (AHP) model was used to ascertain the susceptibility to landslides in the Taq Taq, Erbil Governorate, Kurdistan Region of Iraq. Data was standardized, reclassified, and weighted with AHP, and Python scripts automated the processing of the raster and weighted overlay and weighted statistical computation. The findings indicate that landslide is most controlled by LULC (24.97%), slope (14.86%), soil type (12.06%) and NDVI (11.47%) with the least contribution of aspect and stream proximity. The resulting Landslide Susceptibility Index (LSI) map suggests that about 91.8, 8.1, and almost 0.002 percent of the study area belong to the low, moderate and high susceptibility categories respectively. The high susceptibility areas taking up an insignificant portion of the study area. The suggested GEOBIA-Python-AHP system is highly promising in the reproducible landslide occurrence evaluation and would be of great help in land-use planning and hazard reduction in mountainous areas. The study concludes that Python programming has intersected with GEOBIA, and GIS-based mapping is a paradigm shift towards dynamic and open-source and reproducible landslide modelling.