9 November 2020 in Bulletin of Earthquake Engineering
Schools represent a reference point for communities in any part of the world. Therefore, their safety and resilience against natural catastrophes is of paramount importance. The recent 2015 Gorkha earthquake has unfortunately shown that Nepalese school buildings are highly vulnerable to seismic actions. Most of them are indeed constituted by low-quality unreinforced masonry (URM). The quantification of URM vulnerability is fundamental to estimate the risk associated to school building portfolios at territorial scale. This work discusses statistics available for Nepalese schools and then presents analytical fragility curves for three recurrent URM typologies covering more than 50% of the school building stock. The methodology adopted to derive fragilities is spectral-based and accounts for out-of-plane and in-plane damage potential in a single easy-to-use analytical framework. Inter-building, intra-building and record-to-record variabilities are directly considered in the analysis. The obtained fragilities integrate the studies available for the region and can be used for pre-/post-earthquake risk assessment and prioritization of interventions at country level.
14 October 2020 in Natural Hazards
FCFernando Ramirez Cortes
CFCarina Fonseca Ferreira
Empirical vulnerability models are fundamental tools to assess the impact of future earthquakes on urban settlements and communities. Generally, they consist of sets of fragility curves that are derived from georeferenced post-earthquake damage data. Following the 2015 Nepal earthquake sequence, the World Bank, through the Global Program for Safer Schools, conducted a Structural Integrity and Damage Assessment (SIDA) of about 18,000 school buildings in the earthquake-affected area. In this work, the database is utilized to identify the main structural characteristics of the Nepalese school building stock. For the first time, extended SIDA school damage data is processed to derive fragility curves for the main structural typologies. Data sets for each structural typology are used for a Bayesian updating of existing fragilities to obtain regional models for Nepalese schools. These fragility estimates can be adopted to assess potential seismic losses of the school infrastructure in Nepal. Additionally, they can be used for calibrating loss assessment studies in the wider Himalayan region where the structural typologies are similar.
1 January 2020 in Engineering Structures
1 December 2016 in Engineering Structures
7 April 2021 in International Journal of Architectural Heritage
The repair of historical masonry columns damaged by earthquakes is a complex engineering procedure. In most cases, these elements support important vertical loads, and, for this reason, the repairing interventions (such as block replacement) could generate critical modifications of the stress pattern and eventually lead to local failures of the masonry material. In order to prevent critical situations, the repair work should account a complete unloading-reloading process of the column. However, at this time, no specific indications are provided by technical codes and guidelines. In the present paper, the unloading-reloading process developed for the stone masonry columns of the Basilica di Collemaggio in L’Aquila (Italy) is presented. Particularly, two specific unloading systems were designed and verified with advanced finite element analyses. A three-dimensional finite element model of the colonnade and supported nave wall was implemented to check if the unloading-reloading process would significantly change the state of stress in the masonry, causing local failures. The geometry of the structure was reconstructed from a complete laser scanner survey of the church, by considering all the intrinsic irregularities of heritage constructions. Finally, a comparison between the numerical results and the corresponding values measured during the worksite intervention was carried out.