24 May 2024 in Nuclear Fusion
Deep pellet fueling depth is necessary to achieve a high-density high confinement operation and to conduct some pellet-related researches in current devices, such as trigger of internal transport barrier, and to achieve high fusion power and tritium burn-up fraction in future fusion devices. The newly developed PAM code which can make a fast evaluation on pellet ablation and deposition is applied to optimize injection parameters to achieve deep pellet fueling. Systematic scans on pellet injection parameters including pellet injection positions, injection angles, sizes and speeds are performed for optimization purpose, while at the same time demonstrating flexibility and time efficiency of the PAM code. Dependences of the pellet fueling depth on these injection parameters are revealed by simulation results and analyzed. Simulation results indicate that pellet penetration contributes more to the deep pellet deposition than the -induced plasmoid drifts in low temperature plasmas, while deep pellet fueling in reactor relevant high temperature plasmas has to rely on plasmoid drifts. Though a shallow penetration is expected in high temperature plasmas, the -induced plasmoid drift is expected to be larger than that in relatively low temperature plasmas.
7 August 2023 in Plasma Physics and Controlled Fusion
A significant reduction of the external resonant magnetic perturbation (RMP) required for exciting the locked mode (LM) has been observed experimentally due to the presence of an existing LM on J-TEXT. In a plasma with edge safety factor q a slightly smaller than 3, 3/1 and 2/1 modes are observed to be destabilized successively by a rotating RMP field. The 3/1 mode is excited first and identified as an external kink mode, whose excitation threshold decreases with the operating q a increasing from 2.67 to 2.8 with the absence of a 3/1 rational surface. Shortly after excitation of the 3/1 external kink mode, 2/1 field penetration occurs and the 2/1 mode is excited, as identified by the phase between the 2/1 magnetic response and the RMP field jumping by π. The 2/1 mode is excited with a dominant kink structure and then converts into tearing mode for a duration of several milliseconds. During the excitation of the 2/1 mode, the phase difference between the 2/1 and 3/1 modes evolves from π to around 0 and the 2/1 mode amplitude grows to a saturation value comparable with that of the 3/1 mode. The presence of the 3/1 mode leads to a remarkable reduction of the external RMP current required for the 2/1 mode excitation, which can be explained by the contribution of a 2/1 resonant field from the 3/1 mode via the toroidal coupling effect. The larger 3/1 mode amplitude can lead to a greater reduction. This work reveals that the mode can be excited more easily with a reduced amplitude of RMP or error field due to the impact of the pre-existing mode and this might be a new consideration for error field correlation predictions and active magnetohydrodynamics control actuator designs.
1 March 2021 in Journal of Thoracic Oncology