21 June 2023 in CIRP Journal of Manufacturing Science and Technology
20 April 2023 in CIRP Annals
2 August 2022 in Mechanics & Industry
Among metallic additive manufacturing technologies, electron beam melting (EBM) requires a specific operation called depowdering once a part is built. With the help of a powder recovery system (PRS), this process consists in blowing titanium powder onto a “cake” of a manufactured part in order to separate sintered but not melted powder from the part itself. However, the depowdering of some geometries can in fact become difficult, even impossible, due to the part shape. This article aims at proposing an ultrasonic depowdering mechanism that allows to improve and to quantify the depowdering capabilities of the PRS system currently used. Experimentations are led onto geometries that include canals. A “depowderable depth”/diameter criterion is then applied for comparing the depowdering capacity of the proposed system with the traditional one. First results show that the quantity of powder removed onto samples is highly enhanced with an ultrasonic process. This outcome creates opportunities since additional tests could be implemented onto more complex shapes such as, for instance, parts with internal complex shapes.
1 October 2024 in Review of Scientific Instruments
In this work, scanning photothermal radiometry is used for imaging and to characterize a submicron crack. From the thermal images, the evolution of the crack is mapped in the space with micrometer resolution. A vertical contact interface at the steel–steel junction is used to represent a micro-crack with a thickness less than 0.5 μm. The thermal quadrupole approach is used to model the heat transfer within the semi-infinite vertical crack. Then, using the phase mapping and that calculated from the model, the estimation of both the equivalent thermal boundary resistance of the interface and the average interface thickness was done.
3 May 2023 in Mechanics & Industry
Smart parts providing information to the user thanks to an embedded device are an important step toward the industry 4.0. Magneto-strictive properties of steel are well known and thin strips could be embedded in paramagnetic host part to ensure their structural control. Through this study, the feasibility of smarts parts realized by insertion of thin steel strip during aluminum host part manufacturing is more asserted. This study presents a configuration to embed thin steel strip inside massive part realized by Wire Arc Additive Manufacturing (WAAM). This configuration is used to find a correct steel strip − welding torch offset enabling a correct bonding between the deposited bead and the strip without causing any deterioration to the strip. Thickness maps of these strips realized through X-ray tomography allow to evaluate the deterioration of the strips. Scanning electron microscopy is used to evaluate the strength of the bonding through the thickness of the bimetallic interface realized between the steel strip and the aluminum bead. A good bonding between a thin steel strip and a thick part in aluminum alloy thanks to arc welding is obtained. The thickness difference between the two entities welded together represent a ratio of 10, which is 3 times bigger than the previous work reported in literature. Steel to aluminum welding is a challenging research topic and thin to thick element welding as well. This paper address both of these topics together and is a step toward smart metallic part manufacturing.