7 October 2025 in IEEE Journal on Selected Areas in Communications
Fluid antenna systems (FASs) have emerged as a promising antenna technology for 6G networks by tapping into new degrees of freedom (DoF) in antenna positions to harness multiplexing gains. In this paper, we propose an implementation of FASs enabled by reconfigurable holographic surfaces (RHSs) and construct a 384-element prototype. Benefiting from its amplitude-modulation capabilities, RHSs can adjust the antenna positions by activating different subsets of elements. However, due to unknown user locations, multiple antenna ports, and varying channel environments, beamforming schemes relying on acquiring accurate channel state information (CSI) suffer high complexity. To avoid CSI acquisition, we design a low-overhead fluid beam training scheme for RHS-enabled FAS. Unlike fixed-position antennas, fluid beam training employs different antenna positions via element activation, namely sliding windows, for each codeword to improve the channel quality, thereby enhancing the received signal strength (RSS). Such an element activation method is also applied to reprogram the effective array aperture, hence the fluid beam training adopts a hierarchical structure where the beamwidth of codewords narrows across layers. Experimental and simulation results verify the variation of RSS with sliding windows. Compared to traditional schemes, the proposed fluid beam training utilizing sliding windows achieves higher training accuracy and data rates.
20 May 2025 in IEEE Transactions on Wireless Communications
Reconfigurable holographic surfaces (RHSs) have been suggested as an energy-efficient solution for extremely large-scale arrays. By controlling the amplitude of RHS elements, high-gain directional holographic patterns can be achieved. However, the complexity of acquiring real-time channel state information (CSI) for beamforming is exceedingly high, particularly in large-scale RHS-assisted communications, where users may be distributed in the near-field region of RHS. This paper proposes a one-shot multi-user beam training scheme in large-scale RHS-assisted systems applicable to both near and far fields. The proposed beam training scheme comprises two phases: angle search and distance search, both conducted simultaneously for all users. For the angle search, an RHS angular codebook is designed based on holographic principles so that each codeword covers multiple angles in both near-field and far-field regions, enabling simultaneous angular search for all users. For the distance search, we construct the distance-adaptive codewords covering all candidate angles of users in a real-time way by leveraging the additivity of holographic patterns, which is different from the traditional phase array case. Simulation results demonstrate that the proposed scheme achieves higher system throughput compared to traditional beam training schemes. The beam training accuracy approaches the upper bound of exhaustive search at a significantly reduced overhead.
4 November 2024 in IEEE Network
Benefiting from the large-scale antenna arrays, the forthcoming 6G networks are capable of providing high spectral efficiency by utilizing spatial diversity. The near-field region also expands with the large aperture, and thus, users may randomly distribute in both the near and far fields, leading to near-far (NF) field communications . In this article, by deploying large-scale reconfigurable intelligent surfaces (RISs) that serve as an energy-efficient solution, a general codebook-based beam training scheme for the RIS-aided NF-field communications is proposed, which does not rely on any channel state information. Starting from the basics of NF-field communications, we present the design principles and key technologies of the NF-field codebook-based beam training, targeting at serving users located either in the near field or the far field without prior knowledge of their locations. Utilizing the general scheme, a case study is presented for a large-scale RIS-enabled multiuser communication system. The proposed scheme is further extended to the wideband transmission, the omni-directional surface case, and the communication-assisting sensing. Future research directions for NF-field communications enabled by intelligent surfaces are also discussed.
31 March 2023 in IEEE Wireless Communications Letters
Intelligent omni-surface (IOS) is a novel metasurface to provide full-dimensional services by jointly engineering its reflective and refractive properties. In this letter, we study an IOS-aided system where the beamforming scheme is developed via beam training with codebooks at the base station (BS), IOS, and users to avoid the extremely high overhead of acquiring perfect channel state information (CSI). A larger codebook size brings a higher peak data rate but requires more spectrum and time resources for beam training, leading to low system throughput. To investigate the tradeoff between the peak data rate and training overhead, we mathematically model the relationship between the codebook size of the IOS and the throughput. Given different user distributions, we discuss the codebook size under the constraint of the asymmetric power of the reflective and refractive signals. Moreover, the influence of the power ratio between reflective and refractive signals on the codebook size is also analyzed. Simulation results verify our theoretical analysis.
13 June 2025 in IEEE Transactions on Wireless Communications
As a typical instance of the metasurface, intelligent omni-surfaces (IOSs) emerge as a potential technique for coverage extension benefiting from the symmetric reflection and refraction. For large-scale IOSs, the enlarged near-field region allows users to be randomly distributed in both the near and far fields of IOSs. To perform beamforming in such a near-far (NF) field communication system, in this paper, we propose an NF-field codebook design and beam training scheme, which avoids the high complexity of accurate channel state information (CSI) acquisition. We reveal that the traditional Rayleigh distance based NF-field boundary may cause redundant training overhead. Thus, an effective NF-field boundary is introduced in terms of the beamforming gain. We then utilize this NF-field boundary and the symmetric characteristic of the IOS reflective-refractive signals to design an IOS-tailored codebook consisting of multiple codewords covering both the near and far fields. On this basis, a joint reflective-refractive beam training mechanism for IOS-aided systems is presented, where beam training is simultaneously performed in the symmetric regions of the IOS, thereby reducing training overhead. Simulation results show that the proposed scheme achieves a higher sum rate than the traditional codebooks given the same number of codewords, and performs close to the perfect CSI case.
14 November 2025 in IEEE Transactions on Wireless Communications
Reconfigurable intelligent surface (RIS) has been considered as an effective approach to achieve extremely large-scale MIMO (XL-MIMO). To mitigate the high-complexity of channel information acquisition brought by the large number of RIS elements, beam training has been applied to select an optimal beam from a predefined codebook for beamforming in large-scale RIS-aided systems. However, practical limitations of RIS, such as its macrocell structure and finite phase shifts, result in the overlap of codeword coverage, i.e., non-orthogonal beams, which degrades the accuracy of beam training. In this paper, we propose a self-correcting hierarchical beam training scheme, where we model the beam training as a sequential process based on a tailored long short-term memory network. Received powers of sequentially selected codewords layer by layer are used to construct quasi-orthogonality for optimizing the beam selection. Unlike traditional deep learning methods relying on sufficient data, which takes substantial overhead to collect, we design a diffusion-empowered generation module given the general data-constrained conditions. The generation module is capable of synthesizing codebook power profiles to enhance the beam training performance. Simulation results demonstrate that our proposed method outperforms existing beam training approaches in terms of accuracy and sum rate, even in the presence of dataset limitations.