upconversion (UC) micro-crystals with a tetragonal structure were fabricated through a modified sol–gel method. The samples are found to be spherical in shape with a diameter of about 300 nm. Upon excitation of 980 nm light, the UC emission spectra of the phosphors exhibit green and red bands corresponding to the characteristic transitions of ions. As concentration rises, the green emission intensity increases and reaches the maximum at 2.0% content, while the ratio of green/red emission intensities ( ) declines monotonically. Temperature sensing capability was studied employing the fluorescent intensity ratio technique from the thermally coupled levels and of in temperature range of 293 533 K. It is interesting to find that concentration has influence on the absolute sensitivity , while the relative sensitivity is almost independent of content. Furthermore, excellent thermal stability and high temperature sensitivity is also demonstrated in the 2.0% -doped sample with the obtained maximum and as high as and , respectively. The experimental results indicate that co-doped phosphors can be excellent candidates for temperature sensing applications.
Full-solution processed and all-inorganic electroluminescent devices are regarded as a promising technology for high-resolution displays and solid-state lighting due to their low-cost and air stable properties. In this work, hole transport layer-free and full-solution processed all-inorganic quantum dot light emitting diodes (QD-LEDs) were fabricated successfully. We employed a simplified device architecture of glass/ITO/Mg(OH)2 (2 nm)/QDs (18 nm)/ZnO (75 nm)/Al (100 nm) and utilized insulating Mg(OH)2 layer to balance the electron and hole charge transportation. All of the device fabrication procedures were carried out in ambient condition except for thermally evaporating and the completed QD-LEDs were measured in the open air without any encapsulation. A maximum luminance of 2930 cd/m2 and current efficiency of 1.08 cd/A were obtained with a low turn-on voltage of 1.6 V.
12 March 2021 in Journal of Materials Science: Materials in Electronics