10 September 2018 in Applied Physics Letters
Blue light-emitting diodes based on III-nitride semiconductors are nowadays widely used for solid-state lighting. They exhibit impressive figures of merit like an internal quantum efficiency close to 100%. This value is intriguing when considering the high dislocation density running throughout the InGaN/GaN quantum well (QW) active region. This striking feature is currently ascribed to carrier localization occurring in the InGaN alloy, which hinders their diffusion toward dislocations. However, it was recently reported that another source of defects, disconnected from dislocations, dramatically decreases the radiative efficiency of InGaN/GaN QWs. Those defects, present at the surface, are usually trapped in an InGaN underlayer (UL), which is grown before the QW active region. To get insight into the trapping mechanism, we varied the UL thickness, In content, and materials system (InGaN or InAlN) and studied the photoluminescence decay time at 300 K of a single InGaN/GaN QW. Our data demonstrate that defects are incorporated proportionally to the indium content in the UL. In addition, we show that those defects are created during the high-temperature growth of GaN and that they segregate at the surface even at low-temperature. Eventually, we propose an intrinsic origin for these surface defects.
1 February 2019 in Applied Physics Express
15 March 2021 in Applied Physics Letters
An indium-containing layer positioned underneath the InGaN/GaN quantum well (QW) active region is commonly used in high efficiency blue light-emitting diodes. Recent studies proposed that the role of this underlayer is to trap surface defects (SDs), which, otherwise, generate non-radiative recombination centers in the QWs. However, the origin and the nature of these defects remain unknown. Our previous study revealed that high-temperature growth of GaN promotes SD creation. In this work, we investigate the impact of the GaN-buffer growth temperature on the InGaN/GaN QW efficiency. We show that the 300 K photoluminescence decay time of a single QW deposited on 1- -thick GaN buffer dramatically decreases from few ns to less than 100 ps when the GaN buffer growth temperature is increased from 870 °C to 1045 °C. This internal quantum efficiency collapse is ascribed to the generation of SDs in the GaN buffer. A theoretical study of temperature-dependent defect formation energy in GaN suggests that these SDs are most likely nitrogen vacancies. Finally, we investigate the formation dynamics of SDs and show that they are mainly generated at the early stage of the GaN growth, i.e., within 50 nm, and then reach a steady state concentration mainly fixed by the GaN growth temperature.
28 September 2021 in Journal of Physics D: Applied Physics
We investigate the density of defects and the degradation rate in InGaN light-emitting diodes having identical dislocation density and epitaxial structure, but different indium content in the quantum well (QW; 12%, 16%, 20%). Our results, based on combined steady-state photocapacitance, light-capacitance voltage, and degradation measurements indicate that: (a) the density of defects in the superlattice underlayer is identical for the three wafers, indicating good and reproducible growth conditions; (b) the density of defects within the active region of the devices shows a monotonic dependence on the indium content in the QWs. These results, consistent with previous studies on the topic, prove unequivocally the important role of indium in favoring the incorporation of point defects, further clarifying the possible mechanisms of defect formation, and give a quantitative assessment of the related effect; (c) in step-stress experiments, the degradation rate was found to be much stronger for devices having high indium content in the QW. This result can be explained by considering a decrease in injection efficiency due to the generation or transport of defects, or an increment in defect-assisted Auger recombination terms due to the propagation of defects.
17 February 2026 in Journal of Applied Physics
InGaN/GaN-based light-emitting diodes (LEDs) exhibit remarkable tolerance to high threading dislocation densities (TDDs), maintaining internal quantum efficiencies above 90% at room temperature even with TDD exceeding 108 cm−2. This robustness is attributed to V-shaped pits (V-pits), which form around threading dislocations (TDs) in InGaN/GaN quantum wells (QWs) and create potential barriers that inhibit carrier diffusion toward non-radiative dislocation cores. However, assessing the intrinsic non-radiative activity of dislocations in InGaN QWs is challenging, as standard metalorganic vapor-phase epitaxy-grown LED structures tend to exhibit V-pits. Those V-pits originate from the InGaN underlayer (UL) used to trap surface defects from high-temperature GaN growth, ensuring high QW efficiency. To investigate the genuine properties of TDs, we developed an InGaN UL that suppresses V-pits while maintaining surface defect-trapping capability. By adjusting growth conditions, we fabricated QWs with and without V-pits and compared their optical properties. Photoluminescence and cathodoluminescence measurements confirmed that TDs in InGaN QWs act as non-radiative centers. Time-resolved photoluminescence further revealed comparable capture cross sections for dislocations and point defects.