1 December 2017 in International Journal of Geomechanics
Soil arching is a phenomenon describing stress redistribution due to relative movement between adjoining portions. It commonly exists when soil interacts with structure elements, such as tunnels, retaining walls, buried structures, and piles in pile-supported embankments. A yielding or ultimate state of soil (i.e., the shear stress in soil is equal to its shear strength) is mostly assumed in analytical models for soil arching. In reality, the level of shear stress and the shape of the slip surface in the soil depend on the magnitude of relative movement of the soil. In this study, a custom-made trapdoor test box was used to investigate the progressive development of soil arching with the trapdoor displacement. The dimensions of the test box was 1.76 m long, 0.46 m wide, and 1.48 m high, whereas the trapdoor had dimensions of 0.36 m wide and 0.46 m long. Earth pressures were installed on the top and sides of the trapdoor to monitor the development of soil arching with the displacement of the trapdoor. Furthermore, data from five references available in the literature were adopted to evaluate the progressive development of soil arching with the displacement for different geotechnical applications. Terzaghi’s method was used to calculate the two-dimensional soil arching ratios (i.e., the measured earth pressure divided by the overburden pressure) in all cases in this study using three different values of lateral earth-pressure coefficient (K), and the results were compared with the measured results. Terzaghi’s method calculated the soil-arching ratios reasonably well when the trapdoor displacement was equal to or larger than 10% of the trapdoor width. To facilitate the application of progressive development of soil arching with displacement in engineering practice, a simplified ground reaction curve (GRC) was proposed as three straight lines to represent the progressive development of two-dimensional soil arching with relative displacement. The methods for determining four required parameters were provided, and the proposed method was verified using three trapdoor test results from both this study and the literature.
1 December 2019 in Journal of Geotechnical and Geoenvironmental Engineering
Soil arching exists in many geotechnical applications, including tunnels, buried pipes, and geosynthetic-reinforced pile-supported (GRPS) embankments. Soil arching has been mostly investigated using trapdoor tests under soil self-weight and/or uniform surcharge. In real applications, localized surface loading, such as traffic loading, may be applied onto soil and affect or degrade soil arching. Geosynthetic reinforcement is used in GRPS embankments or over buried pipes and may have effects on soil arching mobilization and degradation under localized surface loading. The effects of surface traffic loading and geosynthetic reinforcement on soil arching have not yet been well investigated. This study investigated the effects of static surface footing loading on soil arching mobilization and degradation in geosynthetic-reinforced and unreinforced embankments using trapdoor model tests under a plane-strain condition. These model tests consisted of both trapdoor and loading stages, which were used to evaluate the mobilization and the degradation of soil arching, respectively. The trapdoor test results show that the displacement of the trapdoor induced progressive mobilization of soil arching and geosynthetic reinforcement minimized soil arching mobilization due to the change of the soil deformation. Localized surface loading degraded soil arching. Single and double layers of geosynthetic reinforcement helped maintain soil arching under localized surface loading. The test results also show that the biaxial geogrid was more effective than the uniaxial geogrid with similar tensile strength and stiffness in carrying the load due to its better lateral restraint. Geosynthetic reinforcement increased the applied surface load required to fully degrade soil arching and eliminate the benefit of the geosynthetic.
1 February 2019 in Journal of Pipeline Systems Engineering and Practice
SRSeyed Mustapha Rahmaninezhad
Seyed Mustapha Rahmaninezhad
1 September 2021 in Journal of Geotechnical and Geoenvironmental Engineering
Pile-supported (PS) embankments have been used increasingly to support highways and railways on soft subsoils. In addition to the self-weight of the embankment, this embankment system is often subjected to surface localized loading, such as traffic loading. In this embankment system, soil arching is a key load transfer mechanism. Stability of soil arching under localized surface loading is important because traffic loading applied on the embankment surface can transfer onto and between pile heads and affect the degree of mobilization and degradation of soil arching. Conventional trapdoor systems have a rigid trapdoor, control its displacement manually/automatically, and cannot represent load-induced subsoil settlement below the embankment. This study utilized a trapdoor supported on low-stiffness or high-stiffness compression springs that moved under the load above the trapdoor (called a spring-based trapdoor) to evaluate the effects of continuous trapdoor displacement on the soil arching stability under static footing loading. To investigate the trapdoor rigidity effect, a trapdoor consisting of three segments (called a flexible trapdoor) was utilized in this study as well. The trapdoor test results showed that soil arching was mobilized during fill placement as the fill height and the trapdoor displacement increased. Subsequently, under static footing loading, the degree of soil arching increased at a low applied pressure; however, it degraded under higher footing loading that caused a larger trapdoor displacement. The high-stiffness trapdoor increased the degradation pressure required to eliminate soil arching even though it reduced the degree of soil arching under a low applied pressure compared with the low-stiffness trapdoor. The flexible trapdoor resulted in a uniform stress distribution on the trapdoor but reduced the total load transferred to the supports. The conventional trapdoor resulted in a lower soil arching ratio compared with the spring-based trapdoor during the soil arching mobilization, but had a higher soil arching degradation rate than the spring-based trapdoor due to continuous soil movement.
1 August 2020 in Tunnelling and Underground Space Technology
SRSeyed Mustapha Rahmaninezhad
Seyed Mustapha Rahmaninezhad
1 October 2019 in Journal of Materials in Civil Engineering
SRSeyed Mustapha Rahmaninezhad
Seyed Mustapha Rahmaninezhad