Recent advances in flexible and stretchable electronics have led to a surge of electronic skin (e-skin)–based health monitoring platforms. Conventional wireless e-skins rely on rigid integrated circuit chips that compromise the overall flexibility and consume considerable power. Chip-less wireless e-skins based on inductor-capacitor resonators are limited to mechanical sensors with low sensitivities. We report a chip-less wireless e-skin based on surface acoustic wave sensors made of freestanding ultrathin single-crystalline piezoelectric gallium nitride membranes. Surface acoustic wave–based e-skin offers highly sensitive, low-power, and long-term sensing of strain, ultraviolet light, and ion concentrations in sweat. We demonstrate weeklong monitoring of pulse. These results present routes to inexpensive and versatile low-power, high-sensitivity platforms for wireless health monitoring devices.
31 March 2021 in Semiconductor Science and Technology
Gallium nitride (GaN) is becoming a mainstream semiconductor for power and radio-frequency (RF) applications. While commercial GaN devices are increasingly being adopted in data centers, electric vehicles, consumer electronics, telecom and defense applications, their performance is still far from the intrinsic GaN limit. In the last few years, the fin field-effect transistor (FinFET) and trigate architectures have been leveraged to develop a new generation of GaN power and RF devices, which have continuously advanced the state-of-the-art in the area of microwave and power electronics. Very different from Si digital FinFET devices, GaN FinFETs have allowed for numerous structural innovations based on engineering the two-dimensional-electron gas or p–n junctions, in both lateral and vertical architectures. The superior gate controllability in these fin-based GaN devices has not only allowed higher current on/off ratio, steeper threshold swing, and suppression of short-channel effects, but also enhancement-mode operation, on-resistance reduction, current collapse alleviation, linearity improvement, higher operating frequency, and enhanced thermal management. Several GaN FinFET and trigate device technologies are close to commercialization. This review paper presents a global overview of the reported GaN FinFET and trigate device technologies for RF and power applications, as well as provides in-depth analyses correlating device design parameters to device performance space. The paper concludes with a summary of current challenges and exciting research opportunities in this very dynamic research field.
AlGaN/GaN high electron mobility transistor (HEMT) structures are grown on 200-mm diameter Si(111) substrates by using three different buffer layer configurations: (a) Thick-GaN/3 × {AlxGa1−xN}/AlN, (b) Thin-GaN/3 × {AlxGa1−xN}/AlN, and (c) Thin-GaN/AlN, so as to have crack-free and low-bow (1800 cm2/V∙s) and 2DEG carrier concentration (>1.0 × 1013 cm−2) on Si(111) substrates.
In this work, we propose a novel optically-controlled vertical GaN finFET directly triggered by low-power ultraviolet (UV) illumination. The proposed device consists of a normally-off, vertical GaN finFET with an optically transparent illumination window. Electron-hole pairs are generated in the depleted fin channel upon 365 nm illumination to turn on the device. The operating principle of optically-controlled, vertical finFETs was first confirmed through simulations where 5 orders of magnitude on-off current ratio were predicted under an illumination intensity of 30mW/cm 2 . The proposed devices were then experimentally demonstrated with an on-current density greater than 90 A/cm 2 at V DS = 3 V, triggered by a few μWs of UV LED power. Despite having relatively high dark currents, the devices have shown maximum optical responsivity greater than 10 5 A/W owing to the strong photovoltaic effects in the highly scaled fins. These initial results demonstrate the potential of our proposed device to enable future high-power systems with greatly enhanced electromagnetic interference (EMI) immunity, simplicity, costeffectiveness, and reliability.
Field-emission-based vacuum transistors have been proposed as promising candidates for future high-power and harsh-environment electronic devices. However, the lack of an integrated anode is still an issue for vertical field-emission vacuum transistors for some applications such as radiation-hard vacuum-electronic-based circuits. In this work, an anode-integration technology enabled by tilted metal deposition is proposed and experimentally demonstrated on GaN gated field emitter arrays (FEAs). Full transistor prototypes with a 10 3 on-off ratio in anode current are demonstrated. This process is compatible with gated FEAs of various materials, the vacuum channel can be sealed during fabrication, and the vacuum channel length can be controlled via multiple process parameters.
9 January 2017 in Journal of Physics D: Applied Physics
An AlGaN/GaN high electron mobility transistor (HEMT) structure is grown on a 200 mm Si(1 1 1) substrate. The AlGaN/AlN/GaN heterostructure atop, which forms the 2D electron gas, is studied via transmission electron microscopy (TEM), scanning tunneling microscopy, and TEM chemical analysis. To quantify the uniformity of structural, optical, and electrical properties of these AlGaN/GaN HEMT structures, scanning electron microscopy, optical microscopy, atomic-force microscopy, x-ray diffraction ( ω /2 θ scan and reciprocal space mapping) and Hall effect measurements are employed across the center, middle, and edge of the 200 mm wafer. Small thickness (<3%) and Al-content (<3%) variations in (Al)GaN layers across the wafer are recorded whereas a considerable change (28%) in the electron mobility is observed across the wafer that correlates with variations in surface roughness, defectivity, and layer stress. We attribute the higher mobility in the middle of the wafer to lower interface scattering, thanks to lower surface roughness and less edge-type dislocation density. Additionally, argon (Ar) ion implantation is used as a means for planar electrical isolation, and a seven orders of magnitude decrease in leakage current is achieved when an optimum Ar dose of 10 13 cm −2 is used. The feasibility of scaling AlGaN/GaN HEMTs on a 200 mm Si(1 1 1) platform is discussed.