Avalanche photodiodes were fabricated on AlN templates for back illumination. Structures with different intrinsic layer thicknesses were tested. A critical electric field of was estimated from the variation of the breakdown voltage with thickness. From the device response under back and front illumination and the consequent selective injection of holes and electrons in the junction, ionization coefficients were obtained for GaN. The hole ionization coefficient was found to be higher than the electron ionization coefficient as predicted by theory. Excess multiplication noise factors were also calculated for back and front illumination, and indicated a higher noise contribution for electron injection.
AlGaN/GaN high electron mobility transistor (HEMT) structures are grown on 200-mm diameter Si(111) substrates by using three different buffer layer configurations: (a) Thick-GaN/3 × {AlxGa1−xN}/AlN, (b) Thin-GaN/3 × {AlxGa1−xN}/AlN, and (c) Thin-GaN/AlN, so as to have crack-free and low-bow (1800 cm2/V∙s) and 2DEG carrier concentration (>1.0 × 1013 cm−2) on Si(111) substrates.
In this letter, we demonstrate the effectiveness of the controlled spalling technology for producing high-efficiency (28.7%) thin-film InGaP/(In)GaAs/Ge tandem solar cells. The controlled spalling technique was employed to separate the as-grown solar cell structure from the host Ge wafer followed by its transfer to an arbitrary Si support substrate. The structural and electrical properties of the thin-film tandem cells were examined and compared against those on the original bulk Ge substrate. The comparison of the electrical data suggests the equivalency in cell parameters for both the thin-film (spalled) and bulk (non-spalled) cells, confirming that the controlled spalling technology does maintain the integrity of all layers in such an elaborate solar cell structure.
AlN/GaN double-barrier resonant tunneling diodes (RTDs) were grown by metal-organic chemical vapor deposition on sapphire. RTDs were fabricated via standard processing steps. RTDs demonstrate a clear negative differential resistance (NDR) at room temperature (RT). The NDR was observed around 4.7 V with a peak current density of and a peak-to-valley ratio of 1.6 at RT. Dislocation-free material is shown to be the key for the performance of GaN RTDs.